The water chestnut sugar coating machine is mainly used for the coating of pressed tablets, pills, and granules in the pharmaceutical industry, and can also be used for candy mechanism or coating in the food industry. Its feature is that the tilt angle of the sugar coating pot can be adjusted, and direct heating equipment such as electric stoves and gas can be placed under the pot. Randomly equipped with a separate electric blower, the air outlet extends into the pot for heating or cooling, and the heat can also be adjusted.

The working principle of the water chestnut sugar coating machine:

In order to evenly coat the surface layer of the chip with coating crystals as soon as possible and achieve the purpose of polishing, it is necessary to manually spray the chips in the pot with sugar coated paddles and mixed slurry in stages. By rotating the pot clockwise, the sugar coated tablets are rolled, slid, rubbed and ground in the pot, so that they are evenly distributed on all the chips. At the same time, hot air is passed into the pot to remove the surface moisture of the tablets, and qualified sugar coated tablets are obtained.

This machine provides the best pot body for this sugar coating process, ensuring a stable linear speed to form a good logistics curve for the tablets in the pot, in order to meet the process requirements of uniform thickness, bright color, and no pitting of the sugar coating layer.

The structural characteristics of the water chestnut sugar coating machine:

① The motion of the machine

This machine is a unidirectional low-speed continuous rotation coating equipment, and the main motor drives the pot body to rotate through a belt drive worm gear transmission.

② Structural features

A、 The machine is equipped with an adjustment mechanism, which allows the user to adjust the tilt angle of the sugar coating pot according to the tablet loading amount and material exchange performance. (The amount of charge for the pot body of this machine is based on a tilt angle of 30 degrees Celsius.)

B、 Using worm gear as the terminal output of transmission, it has the characteristics of smooth operation and inability of the pot to rotate on its own.

C、 The hot air drying device uses a hair dryer for heating.