IZE is positioned to provide manufacturing technology and equipment to the manufacturing industry. Agent operation of electrical automation, machinery and transmission, fluid control, instrumentation, tools and other products. As a partner in electrical, hydraulic, and pneumatic solutions, we utilize our collaborative team to provide customers with * solutions, market knowledge, and related value-added services to help optimize their work efficiency, improve reliability and safety, and strive to become a channel for industrial products and solutions.

Aize Industry provides users with consultation, on-site information, assistance in selection, after-sales installation services, and free training for operators.

The following is a special topic on SENSOREX products that arrived this month, requesting sample materials and product information.

Introduction to the SENSOREX Cylinder Sensor SX12V Series:

Meggitt (Sensorex) SX12V sensor is specially designed for servo-actuator’s pressure chamber. chamber

It can resist to a static pressure of 350 bar.

It has a threaded end, necessary for its fixation and for the zero mechanical adjustment.

This sensor SX12V exists in two versions :

- 6 pins connector output

- PTFE cable output (4 wires)

This sensor is an AC/AC LVDT; it has to be used with a conditioning unit model SX3120,

SX9130…

All our signal conditioners are detailed in chapter “electronic conditioners”.

SENSOREX cylinder sensor SX12V series parameters:

Nominal electrical stroke: 12.5 mm to 150 mm

Primary sine excitation: 2.2 Vrms nominal (6 V peak to peak)

Excitation frequency:400 Hz to 15 kHz (3500 Hz nominal)

Maximum consumption: ≤10 mW

Linearity error：≤0.3% FSO

Resolution and hysteresis：non dectectable

Residual null：≤0.5% FSO

Temperature range：- 40℃to + 100℃ (125℃for 500 h)150℃(HP option)

Thermal sensitivity drift：≤500 ppm/℃

Shock resistance：1000 G / 5 ms

Vibration resistance tolerance：12 G peak to peak up to 2 kHz

Dielectric strength：500 V dc/ 1 mn

Insulation resistance：≥1 MOhm

Protection index (dust particles)：IP 65

Max pressure：150 bar standard (350 bar optional)

SENSOREX cylinder sensor SX12V series features:

Characteristics:

Core glued and crimped

Connector or PTFE cable output

Threaded end and zero mechanical setting

Pressureproof by O ring on diameter 12 housing

Diameter 12 steel housing (Fe-Ni 50), core in blackened XC10 steel

The stock models of the regular SENSOREX inventory of IZE-INDUSTRIES are as follows:

SENSOREX cylinder sensor SX12V025HP PN: 690100050C

SX12V series sensor size:

Displacement sensor:

SENSOREX sensor SX9W3

SENSOREX sensor SX12C

SENSOREX sensor SX12K

SENSOREX sensor SX12W

SENSOREX sensor SX20MR

SENSOREX sensor SX20MER

SENSOREX sensor SX27RV

SENSOREX sensor SX12V

Tilt angle sensor:

SENSOREX sensor SX41100

SENSOREX sensor SX41200

SENSOREX sensor SX41400

SENSOREX sensor SX41170

SENSOREX sensor SX41900

SENSOREX sensor SX46100

SENSOREX sensor SX41700

SENSOREX sensor SX42891

SENSOREX sensor SX42810

Speed sensor:

SENSOREX sensor SX41800

SENSOREX sensor SX41200

SENSOREX sensor SX46020

Sensor matching magnetic ruler:

SENSOREX sensor SX12V025HP

In addition to producing cylinder sensors, Sensorex also produces tilt angle sensors and speed sensors in France

French Sanserex SENSOREX signal conditioners and electronic interface modules: models such as DIN rail universal signal conditioners 3120 and 3310, with explicit regulators 65006504 and 6510, metal box industrial regulator 5100, EURO-CARD regulators 900091309300 and 9800, OEM micro regulators MCH-P, CISIC, HA, and HCPJ.

The French Sensorex servo tilt sensor inclinometer position sensors SX41100, SX41200, SX41400, SX41170, and SX41900, and the French Sensorex capacitive tilt sensor inclinometer position sensors SX46100, SX41700, SX42891, and SX42810.

French Sensorex speed sensor accelerometer speedometer, measuring range+/-0.1 to+/-10 G, frequency 0 to 800 Hz, accuracy 0.02% to 0.5% FS, output with RS485 and analog options, models such as SX41800, SX41200, and SX46020. The new 46000 series acceleration tester launched by SENSOREX to the market is divided into two types, with a testing range between+/-2g and+/-10g.

The French Sensorex tilt tester is divided into four types, with a testing range between+/-5 degrees and+/-90 degrees. This series of instruments does not require power adjustment, and the output signal level is high, so there is no need for external adjustment circuits during use. It can adapt to temperatures between -40 ° C and+125 ° C, making it suitable for most industrial applications, especially for servo control, angle control, tilt testing, and acceleration testing in harsh environments such as railways, aviation, and metallurgy.

The above are some of the sensors that arrived this month. If you have any questions about the products, please feel free to contact us, Aize Industrial. We will do our best to solve your problem.