The following are the AIR-LOGIC related products that our company, IZE_Industries, has received this month. Please feel free to call to request sample information and product details.

AIR-LOGIC throttle hole

AIR-LOGIC orifice F-2815-051-B80 AIR-LOGIC orifice F-2815-071-B80

AIR-LOGIC orifice F-2815-201-B80 AIR-LOGIC orifice F-2815-251-B80

AIR-LOGIC Needle Valve F282240B80KSSV AIR-LOGIC Filter F9705B80

AIR-LOGIC pressure regulating valve R-7060222BWK AIR-LOGIC pressure switch F510060MM.1B

Introduction to AIR-LOGIC Throttle Hole F-2815 Series

Molded orifice is a simple flow control method and one of Air Logic's best-selling product lines. Its working principle is flow restriction, and the diameter of the throttle hole is identified in the part number and identified by the color code assigned to each throttle hole size. In addition to the diameter of the orifice, Air Logic also controls many smaller factors that affect the total flow rate of the orifice. That's why Air Logic's throttle holes are able to provide accurate and reliable flow performance in various markets, and win the trust of customers. All Air Logic products are precision molded, assembled, and tested in the United States.

Introduction to AIR-LOGIC Needle Valve F282240 Series

Plastic needle valve is an adjustable flow control method. The needle valve pin and the interior of the valve body form an adjustable orifice for limiting flow. This type of valve is very practical when the exact flow rate cannot be determined or when it is necessary to compensate for flow changes in other components of the system. The extremely fine threads ensure precise adjustment. Thread interference will increase friction and reduce the possibility of flow rate changes caused by vibration. All Air Logics products are assembled and tested in the United States. Plastic needle valves have undergone sealing and performance testing.

Introduction to AIR-LOGIC Filter F970 Series

Threaded inline filters can protect sensitive equipment in pneumatic or liquid circuits from system contamination. The filter adopts a flat stainless steel braided structure, which is suitable for small equipment or large systems that work in conjunction with system level filtration systems. The fluid direction of the inline filter is not limited, and the filtering area on both sides of the filter is equal to the volume of the filter cartridge. The threaded inline filter is the filter with the largest filtration area in Air Logic products.

Threaded inline filters are commonly used to prevent debris generated inside systems or equipment. For example, PTFE tape debris generated during assembly, damaged O-rings on valves, and machining debris on threads.

Threaded connection is a convenient connection method suitable for various applications. This product can be combined with Air Logic's connector product line to meet specific application requirements, such as rotation function and replaceable filter applications.

Introduction to AIR-LOGIC Regulator R7000 Series

Modular ultra small precision pressure regulators are designed for precise pressure regulation and are the choice for instrumentation and industrial applications. This pressure regulator has a 20 turn adjustment range, with an adjustment range of 0.5 to 100 PSI. The maximum supply pressure is 150 PSI. Provide four adjustment ranges: 10 PSI, 30 PSI, 60 PSI, and 100 PSI. The standard configuration comes with an adjustment knob, which can also be extended by 1/4 inch to install the adjustment knob, or equipped with an exposed screwdriver to adjust the pressure range.

The unique modular dovetail groove design allows the regulator to be used independently or assembled into modular pneumatic component combinations.

Introduction to AIR-LOGIC Pressure Switch F5100 Series

The standard pressure switch series offers multiple electrical ratings. 15A and 0.1A are the most common models, usually with the shortest delivery cycles. It is recommended to use the 15A model to directly control most current consuming devices. The 0.1A model switch uses gold-plated contacts and is recommended for low current applications such as PLC and microcontroller interfaces. Other electrical options can be provided according to specific application requirements.

The pressure switch applies signal pressure to the diaphragm resisted by spring force. When the pressure signal force is greater than the spring force, reaching the set point (also known as the "opening" pressure), the internal mechanism acts and changes the electrical state.

When the switch trips, the normally open circuit closes and the normally closed circuit opens. The switch will remain in this state until the pressure signal drops below its reset point (also known as the "off" pressure).

The difference between the "on" pressure and the "off" pressure is defined as the pressure difference or hysteresis of the switch. This is an important feature for applications such as compressor systems controlled by pressure switches. For example, the energy consumption and capacity of the system, as well as the deviation of the switch, will determine the operating frequency of the compressor.

The switch can be adjusted by removing the circular cover plate and rotating the flat head screw. Clockwise adjustment will increase the set point. Adjusting counterclockwise will lower the set point (pressure). It is not recommended to adjust the preset switch. Do not unscrew the flat head screw above until it is flush with the valve body.

AIR-LOGIC Common Product Models:

AIR LOGIC F-2815-050-B80

AIR LOGIC F-2815-101-B80

AIR LOGIC F-2815-401-B80

AIR LOGIC F2815041

AIR LOGIC F2815041B80

AIR LOGIC F2815050

AIR LOGIC F2815050B80

AIR LOGIC F2815051

AIR LOGIC F2815051B80

AIR LOGIC F2815051PP

AIR LOGIC F2815071

AIR LOGIC F2815071B80

AIR LOGIC F2815101

AIR LOGIC F2815101B80

AIR LOGIC F2815121

AIR LOGIC F2815121B80

AIR LOGIC F2815141PC

AIR LOGIC F2815161

AIR LOGIC F2815161B80

AIR LOGIC F2815201

AIR LOGIC F2815201B80

AIR LOGIC F2815251

AIR LOGIC F2815251B80

AIR LOGIC F2815301

AIR LOGIC F2815301B80

AIR LOGIC F2815401

AIR LOGIC F282240B80KSSV

AIR LOGIC F282240B80KSSVWS

AIR LOGIC F282240B80KSSVWSE

AIR LOGIC F282240B80KSSVWSV

AIR LOGIC F282240B85KSSWS

AIR LOGIC F282240B85KSSWSE

AIR LOGIC F282240B85KSSWSV

AIR LOGIC F282240KSSWS

AIR LOGIC F282240KSSWSE

AIR LOGIC F282240KSSWSV

AIR LOGIC F282241B80KSSWS

AIR LOGIC F282241B80KSSWSE

AIR LOGIC F282241B80KSSWSV

AIR LOGIC F282241B85KSSWS

AIR-LOGIC F-2815-051-B80

AIR-LOGIC F-2815-071-B80

AIR-LOGIC F-2815-101-B80

AIR-LOGIC F-2815-161-B80

AIR-LOGIC F-2815-201-B80

AIR-LOGIC F-2815-251-B80

AIR-LOGIC F-2815-301-B80

AIR-LOGIC F-2815-401-B80

AIR-LOGIC F510030FM

AIR-LOGIC F510030FM.1B

AIR-LOGIC F510030FM10A

AIR-LOGIC F510030FM25A

AIR-LOGIC F510030FM3A

AIR-LOGIC F510030FM5A

AIR-LOGIC F510030FMB85.1B

AIR-LOGIC F510030FMB853A

AIR-LOGIC R-7060-0B0B-W/K

AIR-LOGIC R-7060-0B0B-W/S

AIR-LOGIC R-7060-0B0B-WO/S

AIR-LOGIC R-7060-0G0B-W/K

AIR-LOGIC R-7060-0G0B-W/S

AIR-LOGIC R-7060-0G0B-WO/S

AIR-LOGIC R-7060-0H0B-W/K

AIR-LOGIC R-7060-0H0B-W/S

AIR-LOGIC R-7060-0H0B-WO/S

AIR-LOGIC R-7060-0I0B-W/K

AIR-LOGIC R-7060-0I0B-W/S

AIR-LOGIC R-7060-0I0B-WO/S

AIR-LOGIC R-7060-0J0B-W/K

AIR-LOGIC R-7060-0J0B-W/S

AIR-LOGIC R-7060-0J0B-WO/S

AIR-LOGIC R-7060-1B1B-W/K

AIR-LOGIC R-7060-1B1B-W/S

AIR-LOGIC R-7060-1B1B-WO/S

AIR-LOGIC R-7060-1G1B-W/K

AIR-LOGIC R-7060-1G1B-W/S

AIR-LPGIC F97043

AIR-LPGIC F97043B80

AIR-LPGIC F97043B85

AIR-LPGIC F97043B86

AIR-LPGIC F97043P80

AIR-LPGIC F97043P85

If you need complete technical consultation on AIR-LOGIC, please feel free to call Aize Industrial or visit our website. We will do our best to solve your problem.