The fully automatic flat labeling machine is a machine equipment used for automatic label bonding, widely used in fields such as food, medicine, cosmetics, and machinery. In order to ensure the normal operation of the machine and extend its service life, it is necessary to operate the fully automatic flat labeling machine correctly. Today, the editor will take you to understand the operating procedures of the fully automatic flat labeling machine.
1、 Power on preparation and cleaning
1. After confirming that the device is powered on and the power is stable, press the power button.
2. Open the safety doors on the front, back, and both sides of the labeling machine, reset each adjusting component, and clean the dust and debris around the production line.
3. Protect the wiring components to prevent them from being bumped or pinched by the machine.
4. Pay attention to the operation status of the equipment and ensure that it is functioning properly before starting the next operation.
2、 Label settings
1. Set the positioning device according to the label size and labeling position.
2. Set the label supply device according to the size and shape of the label.
3. Adjust the position and tension of the label by setting up auxiliary devices such as sensors and photoelectric switches.
3、 Parameter setting
1. Set parameters such as labeling speed, labeling distance, and label indentation as needed.
2. Set corresponding parameters such as labeling pressure and angle based on different materials and label characteristics.
3. During the operation, adjust the parameters according to the labeling effect to ensure correct labeling.
4、 Labeling
1. Load the label into the label supply device and adjust the positioning device to ensure the accuracy of the label.
2. Press the start button, and the device will start running, automatically completing the labeling process.
3. Monitor the operation status of the equipment to ensure the accuracy and stability of label fitting.
4. Send the pasted labels to the next process and end this operation.
5、 Shut down
1. After the operation is completed, press the stop button first to stop the device from running.
2. Clean the label supply device and conveyor belt.
3. Close the safety doors on the front, back, and sides of the labeling machine, and clean the equipment surface and surrounding environment.
4. Disconnect the power supply to ensure the safety of the equipment.