Introduction to the Performance of 10BGZA-5 Multi Unit Fermentation Tank
Date: 2015-12-22Read: 24
10L magnetic stirring in-situ sterilization fermentation tankBasic system
1) Glass tank: 5/7/10 liters (working volume 3/5/7 liters, with stainless steel at the bottom and glass at the top)
2) Magnetic stirring speed: 0-1000 ± 5rpm
3) Temperature control: (cooling water+5 ℃) -50.0 ℃± 0.2 ℃ (electric heating, PID switch control)
4) PH control: 2.00-12.00 ± 0.05pH
Mettler electrode, acid-base bidirectional, peristaltic pump PID switch control. <Compatible with domestic electrodes>)
5) Dissolved oxygen: 0-150 ± 3%, display accuracy of 0.1%
(Mettler electrode, can be linked with speed control,<compatible with domestic electrodes>)
6) Foam: (electrode detection, time proportional switch control of one peristaltic pump)
7) Supplement: (controlled by a peristaltic pump time proportional switch)
8) Ventilation flow rate: 0-5/7/10L/min (rotor flowmeter,<automatic detection control optional>)
9) Disinfection method: In place sterilization
Control system: Single tank can use BIOTECH-2002 biological process controller supplemented with BIOTECH-FCS fermentation monitoring software, which allows you to observe fermentation changes on-site and remotely monitor the fermentation process; If multiple or multi-stage fermentation tanks are used, BIOTECH-3000/7000/8000/9000 biological process controllers can be used to achieve more measurement and control functions. (For more control functions, please refer to the introduction of relevant biological process controllers and fermentation monitoring software)
10L magnetic stirring in-situ sterilization fermentation tank
1) Air flow, tank pressure, liquid level detection and control
2) Exhaust O2 and CO2 detection
3) Two additional feeding routes can be added
4) Can add an electronic balance weighing system