The fully automatic 3D mixer is a novel material mixer widely used in industries such as pharmaceuticals, chemicals, food, light industry, and scientific research institutions. This function can mix powdered or granular materials with good fluidity very evenly.
The maintenance methods for a fully automatic 3D mixer mainly include the following aspects:
• Regular inspection and replacement of lubricating oil: Replace new oil every three months and clean the reducer regularly. At the same time, regularly lubricate the rotating bearings at both ends to prevent them from getting stuck.
Check key components: Regularly inspect worm gears, bearings, mechanical seals, worm gears, and other components every month to ensure their smooth operation and no loose fasteners. If any abnormal situation is found, it should be dealt with promptly.
Daily maintenance: Check, clean, and wipe the equipment 15-30 minutes before and after work every day to ensure that it is in a clean, tidy, and safe condition. In addition, daily operation data such as liquid level, temperature, pressure, etc. are recorded, and equipment cleaning and inspection are carried out.
• Shutdown inspection: When a malfunction occurs, the equipment should be stopped first and the cause checked to ensure that it is in good condition and all components are complete. If abnormal vibration or abnormal sound is found, the machine should be stopped immediately for inspection.
Cleaning and rust prevention treatment: After use, clean the residual materials in all parts of the machine. If the machine is not in use for a long time, wipe it clean and apply rust prevention oil to the surface of the parts. Cover it with a cover.
Safe operation: Before starting up, check whether all buttons, switches, and indicator lights are intact. During operation, close the discharge port first, add the raw materials, turn on the power, and after mixing is complete, turn off the power and open the discharge port to release the raw materials. Clean and sanitize the equipment after each production.