The hot air circulation tunnel sterilization oven is an efficient and energy-saving industrial equipment mainly used for drying and sterilizing materials. Below, the editor will briefly introduce the operation process and application of the hot air circulation tunnel sterilization oven:
Operation process of hot air circulation tunnel sterilization oven:
1. Preparation stage: Place the materials to be processed on the mesh belt and ensure that the inside of the oven is clean and free of debris.
2. Start the oven: Connect the power, turn on the leakage automatic switch to set the parameters of the temperature meter and time relay.
3. Heating up: Pull the switch to the "heating" position to start the heating element working, and the temperature inside the oven gradually increases
4. Sterilization and drying: When the temperature reaches the set value, the time relay starts timing, and the material completes the sterilization and drying process in the oven.
5. Cooling discharge: After passing through the cooling section, the material temperature drops to a safe range and is then discharged through the discharge port.
6. Turn off the oven: After processing all materials, turn off the oven power, clean the inside of the oven, and wait for the next use.
Hot air circulation tunnel sterilization oven is widely used in multiple industries:
Pharmaceutical industry: used for drying and sterilizing drugs to ensure their quality and safety.
Building materials industry: used for drying and curing building materials products, such as stone slabs, ceramics, etc.
Food industry: used for drying, sterilizing, and maturing food, such as bread, biscuits, meat, etc.
Chemical industry: used for drying and curing chemical products, such as coatings, adhesives, plastics, etc.
Electronics industry: used for drying and dehumidifying electronic components to improve their performance and reliability.