Feeding equipmentThe unpacking and unloading work is completed by manually unpacking and dumping materials into the hopper. The dust generated during unloading operations will be automatically sucked and filtered out by the dust removal device carried above the bag opening station, allowing workers to work in a clean environment. The small bag opening station has the characteristics of simple structure, low energy consumption, operation, and can avoid the impact of dust on the environment and human body during the bag opening process. Suitable for use in industries such as chemical, food, and battery.
The operator places the material bag on the bracket and pushes it into the grid. Next, the operator cuts a vertical opening in the material bag and tilts and shakes it to empty it. The material falls into the hopper by power and can be connected to the conveying unit equipment through the bottom conveying pipeline to effectively output the material to the position. The built-in induced draft dust filter can collect dust generated during the emptying process of the material bag. The filter is cleaned by reverse compressed air injection, and the cleaned dust falls back into the hopper, achieving continuous and uninterrupted feeding.
1. Simple structure, easy operation, and maintenance;
2. It can achieve closed bag feeding and pipeline transportation;
3. Can achieve online cleaning, * design;
4. Automated dust collection design to avoid dust flying and improve the working environment;
5. Scale style, different environments, and factory requirements;
6. Applicable to all industries involving powders, such as food, chemical, battery, etc;
Feeding equipmentIncluding: blower, filter cartridge, housing, feeding door, bin docking part, and reverse blowing pipe. The two ends of the housing are respectively equipped with blower and bin docking parts, and the housing is also equipped with a feeding door. The housing is equipped with a filter cartridge, and the reverse blowing pipe extends into the filter cartridge. This device can discharge clean air and create a negative pressure state inside the shell, allowing dust to be filtered and trapped on the cylinder wall. This prevents dust from overflowing during feeding, thus achieving the effect of feeding. At the same time, it saves costs, controls dust, and improves the working environment.