silo top dust collectorIt is a single unit dust removal equipment with an automatic dust cleaning structure. The top dust collector is widely used in industrial and mining enterprises such as cement, mineral powder, mining, metallurgy, building materials, machinery, chemical industry, and grain processing. It is used to filter small, non fibrous dry dust in gases or recover dry powder in the process flow.
The top dust collector of the warehouseWhat is the working principle?
When the dusty gas enters the box from the bottom of the box, the finer dust is trapped in the cylinder by the filter. The purified gas passes through the filter and enters the upper box through the exhaust outlet. As the dust on the surface of the filter continues to increase during the filtration process, the resistance of the dust collector will also increase. In order to maintain the equipment within the limited resistance range, dust cleaning must be carried out to shake off the dust and reduce resistance. This series of products uses a pulse blowing method controlled by a controller to clean the dust. When the solenoid valve is powered on, compressed air is sprayed out through the blowing pipe to blow out the filter, causing each filter to instantly swell under the action of the blowing and induced gas source, shaking off the dust and discharging it through the ash discharge mechanism.