Clean control is a must see! The dust particle counter is the invisible mass officer

Gather the treasures of semiconductor, pharmaceutical, and medical beauty studios! Is it always being criticizedIs the level of cleanliness reaching its peak? The ground was scratched to reflect light, alcohol sprayed to suffocate, and the result was still unqualified during inspection... Today reveals an industry: true cleanliness standards do not rely on visual inspection, but on this "invisible examiner" - dust particle counter

Soul Interrogation: Based onCan 'clean to the naked eye' really pass the cleanliness inspection?

Where is the cow on this instrument?3Don't think it's just an ordinary detection device, it's full of hardcore technology and specializes in treating various "invisible pollution": laser "visualization" with built-in high-power laser, even if0.1MmParticles (thinner than hair strands)500Double! ）After passing through, it will be accurately captured and converted into digital display - no longer relying on "feeling" to guess cleanliness, traffic is stable like a dog, professional models sample traffic accurately2.83L/minThe error is less than5%Recognize all the data measured! Previously, it was tested with cheap instruments and found to be qualified. However, when I replaced it with this one, it was found to exceed the standard and almost fell into a pit... Foolish operation, starting up and preheating30In seconds, it can be tested with just one click, and it can also automatically matchISOstandard/GMPRequirement, directly issue 'qualified'/Unqualified "result, even novices can understand in seconds

whether it isISO 14644Cleanliness classification, still in ChinaGMPThe requirements for sterile workshops are clearly based on the core criterion of "the number of specific particle sizes", and the dust particle counter can accurately capture them0.1MmGrade particles achieve quantitative monitoring, which is a "hard indicator" that sensory judgment can never replace!

These scenes must be arranged! Don't spend money recklessly anymore

Not all industries require matching, but this4Even if you close your eyes, you won't lose anything01semiconductor/Electronic Party14nmChip pair0.1MmParticle super sensitive!02pharmaceutical/Medical beauty factoryGMPThe 'clearance certificate' for acceptance! Aseptic workshops and medical beauty operating rooms must use it to generate data.03food/The shelf life of baking and sterile facial mask in cosmetics factory is controlled by it!04hospital/laboratoryICUThe postoperative infection rate in laminar flow operating rooms is directly linked to particle concentration!

90%The pit that people have stepped on! Put away the guide to avoiding pitfalls

Buying right doesn't have to be expensive, but don't make these mistakes:

misconception1Buying cheap miscellaneous machines may result in inaccurate traffic, and all the data measured is incorrect,GMPThe acceptance has been directly rejected! Identify the sampling flow rate accurately2.83L/minNational standard models

misconception2If the laser is not calibrated before testing, it will decay. At least calibrate it every year1Next time!

misconception3Place it anywhere and keep it off the ground for testing0.8-1.5m(Height of breathing belt), avoid the wind vent! Otherwise, if the data fluctuates greatly, it will be a wasted test. Conclusion: For those in the clean related industry, this instrument is not a "luxury item", but a "stop loss tool"! Previously helped10Multiple customers have tested it, but anyone who has used it early has never stepped on the cleanliness pit