-
E-mail
3075720350@qq.com
-
Phone
13564167519
-
Address
No. 348 Liaoqin Road, Fengcheng Town, Fengxian District, Shanghai
Shanghai Qingyu Filter Technology Co., Ltd
Process flow of stainless steel titanium rod filter
Date: 2024-07-16Read: 3
Stainless steel titanium rod filter equipment is an emerging filtering device widely used in industries such as chemical, pharmaceutical, food, and environmental protection. It can effectively remove impurities, particles, and suspended solids from liquids, achieving the goal of purifying liquids.
The process principle of stainless steel titanium rod filter equipment relies on the filter element to filter the liquid to be filtered, trapping impurities, particles, and suspended solids in the liquid inside the filter element to achieve the purpose of purifying the liquid. The specific process flow is as follows:
1. Filter activation
When starting the filtration operation, the first step is to start the filter and transport the liquid to be filtered to the inside of the filter through the inlet and outlet pipelines.
2. Liquid passes through the filter element
After the liquid to be filtered enters the filter cylinder through the inlet and outlet pipes, it will flow out from the internal filter element through the filter holes. Due to the small filter holes in the filter element, impurities, particles, and suspended solids in the liquid will be trapped inside the filter element, while pure liquid will flow out along the filter element.
3. Impurity removal
As time goes by, impurities inside the filter element will continue to accumulate, and the liquid passing speed will slow down, resulting in a gradual decrease in the filtering effect of the filter. At this point, it is necessary to clean the filter element to remove impurities and ensure the service life of the baffle.
4. Filter stops working
When the impurities in the filter element reach a certain level, the flow rate of the liquid will decrease, and the liquid level controller will issue a shutdown signal. At this time, the filter will automatically stop working.
