The penicillin bottle filling machine is suitable for small dose water and sugar filling and rolling processes in pharmaceutical factories. The entire machine can complete bottle sorting Transport bottles Quantitative filling Li Gai Send cover During the rolling process, all parts in contact with the drug are made of 316L stainless steel or PTFE, with functions such as non bottling and variable frequency speed regulation.

Maintenance and installation of penicillin bottle filling machine:

1. Because this filling machine is an automated machine, it is easy to pull bottles Bottle cushion The size of bottle caps should be uniform.

2. Before driving, the machine must be turned with a joystick to check for any abnormalities in rotation. Only after confirming that it is normal can the vehicle be driven.

3. When adjusting the machine, tools should be used appropriately. It is strictly prohibited to use excessive tools or forcefully disassemble parts to avoid damaging them or affecting machine performance.

4. Every time the machine is adjusted, it is actually necessary to tighten the loose screws and rotate the machine with a shaking handle to see if its movement meets the requirements before starting the car.

5. The machine must be kept clean and oil stains on the machine are strictly prohibited To prevent machine corrosion, it is necessary to:

⑴ During the production process, promptly remove any liquid medicine or glass debris.

⑵ All parts of the machine surface should be cleaned once before the shift handover, and cleaning lubricating oil should be added to each activity department.

⑶ Clean thoroughly once a week, especially in areas that are difficult to clean during normal use or blow clean with compressed air.

Precautions for installing penicillin bottle filling machine:

1. After opening the box, first check whether the random technical information is complete and whether the machine has been damaged during transportation, in order to solve it in a timely manner.

2. Install and adjust the feeding and discharging components according to the outline drawing in this manual.

3. Add new lubricating oil at each lubrication point.

4. Rotate the machine by shaking the handle to check if it is running in the correct direction (counterclockwise facing the motor spindle), and the machine must be grounded for protection.