-
E-mail
2880397607@qq.com
-
Phone
13816259149
-
Address
No. 8 Tianfeng Road, Tianma Economic and Technological Development Zone, Sheshan Town, Songjiang District, Shanghai
Shanghai Tianfeng Pharmaceutical Equipment Co., Ltd
Process principle and characteristics of 3D motion mixer
Date: 2025-01-02Read: 20
A 3D motion mixer is a device used for mixing or drying powdered, granular, or fibrous materials, widely used in chemical, pharmaceutical, food, light industry, and other fields.
The 3D motion mixer consists of a host, a motor, a transmission system, a mixing cylinder, a feeding port, a discharging port, and other parts. The equipment uses three-dimensional motion and high-speed rotation to mix or dry materials.
The working principle of a three-dimensional motion mixer is that the main engine is driven by a motor, which drives the transmission system to rotate the mixing cylinder at high speed. At the same time, the internal three-dimensional motion of the mixing cylinder causes the material to produce continuous and complex staggered motion within the cylinder, and generates rapid friction, collision, and shear, causing the material particles to rub and collide with each other, thereby achieving the goal of uniform mixing or drying.
The 3D motion mixer adopts the method of "constant speed mixing", which means that the mixing or drying time is constant. At the same time, the interior of the mixing cylinder adopts a "non clogging" design, which can greatly improve the mixing uniformity. Moreover, due to the short contact time between the material and the cylinder, it can avoid material deterioration or adhesion.
The 3D motion mixer mainly has the following process characteristics:
High mixing intensity and uniformity: The 3D motion mixer mixes materials through high-speed rotation, allowing for rapid collisions, impacts, and shearing between material particles. It has high mixing intensity and uniformity, making it suitable for mixing needs of multiple varieties and batches.
Simple operation and low maintenance cost: The equipment is easy to operate, has no special requirements, and has low maintenance costs, which can reduce the workload of manual maintenance.
Wide applicability: The 3D motion mixer is suitable for mixing or drying powdery, granular, or fibrous materials, and can be widely used in fields such as chemical, pharmaceutical, food, and light industry.
Efficient, energy-saving, and environmentally friendly: The equipment adopts a three-dimensional motion and high-speed rotation method for mixing or drying, with short mixing or drying time, which can greatly improve production efficiency. At the same time, there is almost no dust or noise generated during the operation of the equipment, which has a good environmental protection effect.
Last Article: Working principle of fast granulator