1、 Preparation before operation
Before operating the tablet metal detection machine, the following preparations should be made:
1. Check if the testing machine is intact and if all components are working properly.
2. Check if the conveying speed of the conveyor is appropriate and if the detection sensitivity of the detector is appropriate.
3. Confirm that the drug does not contain metal impurities and meets national standards.
4. Wear protective gear such as work clothes, hats, masks, gloves, etc.
2、 Safety precautions during operation
When operating the tablet metal detection machine, the following safety precautions should be taken into account:
1. Operators should strictly follow the prescribed operating procedures and are not allowed to arbitrarily change the detection parameters.
2. Operators should always remain vigilant to avoid accidents caused by work negligence.
3. Do not stand on or cross the conveyor to avoid endangering your own safety.
4. Do not open the hood door of the detection machine during operation, otherwise it may cause errors in the detection results or harm to personnel.
5. During the detection process, it is forbidden to touch the conveyor or detector with your hands to avoid injury accidents.
6. When the testing machine malfunctions, it should immediately stop operation and notify maintenance personnel to handle it.
3、 Cleaning after operation
After operating the tablet metal detection machine, the following cleaning work needs to be carried out:
1. Turn off the main power supply and controller power supply of the tablet metal detection machine, and stop the conveyor.
2. Clean up residues from conveyors, detectors, and other parts to ensure that the equipment is clean and hygienic.
3. Move the equipment to the designated area for storage and perform daily maintenance.