The working principle of the disc airflow crusher is to compress air into high-pressure gas through a compressor, and then use equipment such as refrigeration, filtration, and drying to meet the clean air source requirements of customers. Clean high-pressure gas generates supersonic gas column shaped hypersonic vortices through special nozzles set in multiple directions inside the crushing chamber. At the same time, high-pressure airflow forms a gas piston through the feed injector, creating internal suction negative pressure at the feed inlet. The animal material enters the crushing chamber and collides and collides with each other under the high-speed movement of the supersonic vortex, generating friction to achieve the crushing effect. Under the action of centrifugal force, large particles of material continue to move at high speed outside the vortex field, while small particles are not affected by centrifugal force and move towards the outlet set at the center of the vortex field above the airflow direction. They enter the cyclone separator for collection, and most of the finished products are recovered. The remaining small amount of dust is captured by the dust collector through the pipeline, and the clean gas is discharged into the atmosphere.

The equipment features of the disc type airflow crusher: 1. The whole machine is made of stainless steel and high-purity engineering ceramics or anti adhesive polymer materials to ensure the purity of the finished product.

2 ceramic lining and stainless steel design card structure, not using traditional glue bonding, convenient for future maintenance, cost saving and time saving, only 5-10 minutes. Replace as needed. (Old style glue bonding and replacement cycle 20-25 days)

3. Cleaning and cleaning of the entire machine, (key; the crushing air ring of the main machine can be directly cleaned by our company).

The inner wall of the ventilation duct is smooth and the appearance is also cleaned to ensure that the whole machine does not contaminate each other.