Welcome Customer !

Membership

Help

Tianshui Baoyuan Pharmaceutical Machinery Co., Ltd
Custom manufacturer

Main Products:

pharmamach>Video
Video

Tianshui Baoyuan Pharmaceutical Machinery Co., Ltd

  • E-mail

    XYG844183917@163.com

  • Phone

    13034116468

  • Address

    No. 38 Binhe Road, Qinzhou District, Tianshui City, Gansu Province

Contact Now
Brief Introduction

~The fully automatic pill making machine sends the mixed and uniformly refined medicinal paste into the hopper of the pill making machine, and through the folding plate extrusion, under the action of the propeller, the medicinal strips are extruded from the two side discharge nozzles. When the medicine strip reaches a certain length, it is cut by an automatic cutter, and the feeding plate pulls the cut medicine strip into the distributor. Then, the distributor feeds the medicine strip into the pill making roller at a speed of once per second to make pills. The position of the rolling cutter and the tension of the conveyor belt can be adjusted separately through a fine-tuning device. If it is necessary to change the size and weight of the pellets, it can be achieved by replacing the corresponding pellet making cutter roller, which is easy to operate.

Technical characteristics of fully automatic pill making machine:

1. The machine adopts three motors with variable frequency speed regulation, which can adjust and control the fast and slow speeds of the strip making, medicine strip cutting, and pellet making knife rollers respectively to achieve reasonable matching and achieve the effect of pellet making. The machine has a reasonable structure, stable performance, low noise, simple operation, and high degree of automation. Easy maintenance and cleaning, high production efficiency, the entire machine is made of stainless steel and meets GMP certification requirements.

2. The pellet making knife roller is made of special materials, which are easy to load and unload, pollution-free, and have a long service life; The knife roller is treated with special technology and does not stick to medicine. It does not require alcohol, powder or oil to produce pills that are shiny, round and shiny.

3. The produced pills are molded in one go, with uniform size and small differences in pill weight. The yield rate is over 98%, and the disintegration is good, meeting the standards of the National Pharmacopoeia