-
E-mail
frkang@163.com
-
Phone
15158650999
-
Address
Wenzhou Economic and Technological Development Zone Binhai Park
Wenzhou Furuikang Machinery Technology Co., Ltd
frkang@163.com
15158650999
Wenzhou Economic and Technological Development Zone Binhai Park
Single screw pump belongs to the displacement pump category, which can be used to transport neutral or corrosive liquids, clean or abrasive liquids, liquids containing gases or easily producing bubbles, high viscosity or low viscosity liquids, including liquids containing fibers and solid substances. It can work continuously for a long time while maintaining a stable flow rate and has good self-priming ability
Maintenance and upkeep of single screw pumps
lubrication
Good lubrication is one of the prerequisites for long-term reliable operation of pumps. The bearings and transmission shaft universal joints of the pump are lubricated with lithium based grease. The pump for conveying food medium uses food lubricating grease at the ball head of the transmission shaft.
The bearings of the pump should be regularly removed, cleaned, and lubricated according to the usage environment and working conditions. The recommended amount of lubricating grease filling is generally 1/3-1/2 of the space between the bearing and the bearing housing.
The time for replacing lubricating grease at the universal joint depends on the temperature and pressure of the medium being transported, as well as whether the rubber sheath and sealing ring are damaged.
shaft seal
Pumps using packing seals need to be regularly checked for leaks and the packing cover should be tightened in a timely manner. It is advisable to prevent slight medium dripping, as excessive pressure can cause the packing and shaft to overheat and die. When replacing worn packing rings, they should be completely replaced.
Pumps using mechanical seals should be inspected promptly upon discovery of leaks. Aging O-ring seals, dynamic and static rings with damaged sealing surfaces, etc. should be replaced in a timely manner. Pumps that transport high viscosity, easily precipitated or solidified, corrosive media should have their mechanical seals thoroughly cleaned before prolonged shutdown, and lubricating grease should be applied to the friction end faces of the moving and stationary rings.
Last Article: The Development Prospects of China's Emulsifier Industry
Next Article: Do you know the advantages of CIP in-situ cleaning system?