-
E-mail
frkang@163.com
-
Phone
15158650999
-
Address
Wenzhou Economic and Technological Development Zone Binhai Park
Wenzhou Furuikang Machinery Technology Co., Ltd
What is the working principle of the ultra-high temperature instantaneous sterilization machine?
Date: 2022-11-16Read: 7
Furuikang UHT series ultra-high temperature instantaneous sterilization machineIt is mainly used for sterilization of liquid materials such as fresh milk, fruit juice, beverage, wine, soybean milk, Chinese medicine, etc. The feeding and discharging of this equipment are both equipped with three-way valves, and the flow rate can be adjusted as needed, ensuring reliable use. Heating methods can be divided into two types: steam heating and electric heating.
Below, the editor will briefly introduce the working principle of the Furuikang UHT series ultra-high temperature instantaneous sterilization machine?
The working principle of this UHT sterilization machine is that the material is pumped into the hot and cold material heat exchange device of the sterilization machine by a centrifugal pump to be preheated. Then, it is quickly heated to the sterilization temperature through a high-temperature bucket filled with high pressure and maintained for about 3 seconds before and after, and the microorganisms and enzymes inside are quickly killed. After the material is discharged from the high-temperature barrel, it is cooled by heat exchange with the cold material, usually at a temperature below 65 ° C. If the temperature needs to be increased in the next process, the angle cut off can be adjustedValves or circulation are used to meet the requirements, otherwise cooling water is connected to reduce the discharge temperature.
The discharge is controlled by the throttle valve of the sterilizer, which can keep the boiling point of the material above the maximum temperature while maintaining a constant pressure. During normal production, adjust this valve to generate back pressure control flow by overcoming spring pressure with the driving force of the pump. When cleaning and sterilizing the machine, it should be fully opened. The circulating storage tank can be used to prepare acid-base solutions and effectively clean the scale on the inner wall of the coil.
Due to the simultaneous use of stainless steel three-way plugs, the flow rate can be appropriately adjusted.
