1. Preparation work
Before using a non-woven fabric slitting machine, preparation work needs to be done first. This includes checking whether the equipment is operating normally, confirming whether the sharpness and cutting width of the tool meet the requirements, and checking whether the power and air sources are supplied normally.
2. Adjust parameters
According to the required cutting size and requirements, the parameters of the non-woven fabric slitting machine need to be adjusted. Including cutting speed, cutting pressure, cutting angle, etc. According to different non-woven fabric materials, different parameter adjustments may be required.
3. Loading materials
Place the non-woven fabric material to be cut at the feeding position of the non-woven fabric slitting machine, and ensure that the material is flat and fixed. During the feeding process, attention should be paid to avoiding wrinkles and looseness of the material to avoid affecting the cutting effect.
4. Start cutting
After confirming that all preparation work is completed, the cutting operation can begin. According to the operating interface or buttons of the device, start the non-woven fabric slitting machine and ensure safety during the cutting process. At the same time, it is necessary to closely observe the cutting effect, adjust parameters or handle abnormal situations in a timely manner.
5. Collect and organize
After cutting, it is necessary to collect and organize the cut non-woven fabric materials in a timely manner. Collection devices or manual collection can be used to ensure the integrity and cleanliness of the materials. At the same time, it is necessary to clean and maintain the equipment to ensure its normal operation for the next use.