The fully automatic packaging machine for adhesive tape is used for the molding, processing, and automatic packaging of adhesive tape, absorbent pads, release paper, and other roll shaped materials. It automatically peels, pastes, composites, packages, cuts, and shapes adhesive tape, absorbent pads, release paper, and other roll shaped materials. Controlled by a microcomputer, using a fixed length and positioning control system, LCD screen display, and fiber optic benchmarking. No noise, automatic tension control, no stretching of finished products, automatic packaging, variable frequency speed regulation, easy operation of the whole machine, stable performance.

The correct operation and maintenance of the automatic packaging machine for adhesive bandages are equally important. Today, the editor will introduce the safe operation and maintenance of the automatic packaging machine for adhesive bandages:

1. Every day when starting up, it is necessary to check whether the ultrasonic frequency is normal.

2. The tightness of the chain or belt must be checked every month. If there is any looseness, it should be adjusted immediately, and old butter should be removed and new butter added every six months.

3. The fixing screws, bolts, keys, and pins on the rotating and sliding mechanism are prone to vibration and loosening. Please pay attention to them regularly and conduct a monthly fixing inspection.

4. When working, it is not allowed to wear clothes that are too big or too wide. The cuffs should be tightly tied, and a work cap should be worn. It is not allowed to work shirtless or in slippers.

5. When inspecting or repairing the machine, it must be stopped to prevent accidents from occurring.

6. Keep the inside and outside of the machine clean, tidy, and free of debris.

7. Cutting device: Do not reach or touch this device while the machine is running to avoid collision and cutting injuries.

8. Fixture clamping device: Do not reach between this device while the machine is running to avoid injury from clamping or collision.

9. Do not reach over the welding head while the machine is running to avoid being crushed.

10. When the machine is running, do not touch the ultrasonic vibrator and fan with your hands to avoid burns.

11. When two people come together to disassemble and assemble, they should care for and cooperate with each other, especially before starting up, they should greet each other and confirm safety before starting up.

12. If any abnormal noise or odor is found in the machine motor, it should be immediately stopped and the cause should be carefully identified and repaired before starting up.

13. Non professionals or maintenance personnel are not allowed to open the electrical box and ultrasonic system.

14. Please thread and adjust while the machine is stopped.

15. When the production on duty is completed, pay attention to cleaning and inspecting the machines.