Stainless steel microporous membrane filterComposed of a foldable microporous membrane filter cartridge and a stainless steel outer cylinder, it is equipped with single or multi-core filter cartridges. The filter cartridge body is connected by quick release clamps or quick opening ring head bolts, making it very convenient to install, remove, and clean the filter cartridge. The inner surface of the filter is polished with a mirror finish (roughness Ra ≤ 0.28 μ m), without any hygiene blind spots, and meets the requirements of "FDA" and "GMP" specifications. High filtration accuracy, fast filtration speed, and minimal adsorption. It has the advantages of no medium detachment, no leakage, acid and alkali resistance, corrosion resistance, easy cleaning, and can be backwashed. It is an ideal filtration equipment for industries such as biomedicine, electronics, beer and beverage, and chemical water treatment.

　　Stainless steel microporous membrane filterUsage method:

1. Clean the filter and its connecting components, and install the filter element and housing correctly.

2. Before starting up, first check whether the booster pump is running smoothly, whether the connection is tight, and whether all valves are closed.

3. Before starting up, slowly open the inlet valve and exhaust it, then open the outlet valve for normal filtration.

4. If the filter pressure difference is found to be greater than 0.1Mpa or the flow rate significantly decreases, it indicates that most of the filter holes are blocked. It is recommended that the customer clean or replace the filter element.