Stainless steel quick installation filterIt is a pressure filtration device, in which the liquid flows into the filter bag through the inlet pipe on the side of the filter housing. The filter bag itself is installed inside the mesh, and the liquid can permeate through the filter bag of the required fineness level to obtain qualified filtrate. Impurities particles are captured by the filter bag. The machine is very convenient for replacing filter bags, and there is basically no material consumption in filtration. It has the advantages of quick and convenient installation, disassembly, cleaning, and inspection, and is generally installed in front of fluid pumps and flow meters.
Stainless steel quick installation filterCharacteristics:
1) The Shanghai Juqi sterilization filter is designed according to the standards of similar German products, with a refined 304 or 316 stainless steel sanitary shell, high-precision mechanical polishing on the inside and outside, and quick installation or flange structure. Suitable for sterilization and filtration of air and various liquids.
2) The filter element is sealed with double O-rings to ensure that the air source is filtered.
3) Lined with stainless steel support frame. Regular sterilization using 140 ℃ clean steam can remove bacteria and bacteriophages through repeated disinfection. Meet the process needs of industries such as food, biochemistry, beverages, beer, electronics, etc.
Stainless steel quick installation filterInstructions for use:
When using, you can take a small amount of soft soap or laundry detergent with a brush to gently clean the inside and surface of the filter. Rinse with tap water and distilled water in sequence, fill in the O-ring, and steam sterilize for 30 minutes before use.
Connect the upper and lower feed liquid pipelines, place the feed liquid into the filter from top to bottom, slightly deflate to remove the air inside the filter (otherwise it will affect the filtration speed), and then proceed with filtration.
After normal use, open the filter, remove the filter membrane, rinse it with distilled water, steam sterilize for 30 minutes, and then store it.