Air purification filterIt is suitable for both single and double group adhesives, especially for components that can not only be quantitatively injected, but also automatically mixed, blended, and positioned. It is a fully automatic and user-friendly equipment that is completed in one piece.
Air purification filterDesign features:
1. Mainly used for filtering suspended particles in the air, as the end filter for various types of filtration.
2. The filter material is made of ultra-fine glass fiber filter paper, separated by hot melt adhesive.
3. This design reduces operating costs, and the thermoplastic barrier without partitions ensures the same spacing between pleats, allowing airflow to pass through and achieve high dust holding capacity, fully utilizing the entire depth of the filter material.
4. The outer frame is treated with anodizing to increase strength and durability against corrosion.
5. Seal all sides with special sealing agent to ensure the sealing of the entire filter.
6. Install spray protection nets on the inlet and outlet surfaces to protect the filter paper from damage.
7. Each filter has undergone rigorous testing.
Air purification filterKey technical points:
1. Filtration efficiency: The ratio of the aerosol concentration filtered out by the filter element to the aerosol concentration before filtration, divided into count concentration and weight concentration, expressed as a percentage;
2. Penetration rate: The ratio of the aerosol concentration filtered by the filter element to the aerosol concentration before filtration at rated air volume, expressed as a percentage;
3. Facing wind speed: the velocity of the airflow passing through the windward section;
4. Filtration rate: refers to the airflow velocity passing through the filter material in the filter;
5. Resistance: Under rated air volume, the pressure difference between the airflow passing through the filter is divided into two parts: filter material resistance and filter structure resistance;
6. Dust holding capacity: The total mass of artificial dust captured by the tested filter at the final resistance under rated air flow, expressed in grams.