| The electric heating respirator and electric heating filter are designed according to GMP requirements, consisting of a flexible heating insulation sleeve and a temperature control box. Mainly used to provide heating and insulation function for the filter housing, preventing the accumulation of condensed water and the growth of microorganisms. Widely applicable to injection water systems, filtration and purification processes, as well as filters and respirators for tanks and containers in industries such as biotechnology, pharmaceuticals, and fermentation. |
| Key Features: |
| 1. The specially designed flexible heating sleeve can be attached to the filter shell, making installation easy |
| 2. Easy to upgrade existing filter housings without the need for repeated investment |
| 3. The integrated composite of heating layer and insulation layer significantly saves energy and electricity |
| 4. A separate control box can be located as needed, not limited by the installation position of the filter |
| 5. LED digital temperature control system, which can set the temperature by yourself and is easy and convenient to operate |
| 6. Multiple security measures to adapt to different environments. |
| 7. The surface of the heater can be safely touched. |
| Application: |
| 1. Aseptic filters for exhaust ports of injection water storage tanks and ingredient tanks - prevent condensation from forming inside the filters |
| 2. Freeze dryer vent filter - removes residual condensed water after steam sterilization or moisture after integrity testing |
| 3. Reduce the viscosity of high viscosity materials - making them easier to filter. |
| Technical Specifications: |
| Heating sleeve material: composite silicone |
| Temperature sensor: PT100 |
| Working voltage: 220V, 50HZ |
| Temperature setting range: 0-150 ℃ |
| Display error: less than ± 0.5% ± 1 word, less than ± 1.0% ± 1 word |
| Display mode: Heating temperature - red LED, set temperature - green LED |
| Protection level: IP65 |
| Product selection table: (Special requirements can be customized. Compatible with imported filter cartridges such as Millipore and Pall) Standard interface: 226 type. |
| Technical Specifications: |
| Heating sleeve material composite silicone; |
| Temperature sensor PT100; |
| Working voltage single-phase AC, 220V, 50HZ; |
| Working power: 180W (5 '), 380W (10'), 700W (20 '); |
| Display error less than ± 0.5% F.S ± 1 word, less than ± 1.0% ± 1 word; |
| Display method: Heating temperature - red LED, set temperature - green LED; |
| Protection level IP65; |
| Temperature setting range 0-150 ℃; |
| 10A three eye plug for power cord; |
| Operating environment temperature: 0-50 ° C; humidity: ≤ 85%; Non corrosive and non strong electromagnetic radiation environments; |
| Intelligent temperature controller with temperature control mode, which can work in two position mode (P=0) or PID regulation mode; |
