Installation and commissioning work of high shear emulsifier 1: Check the body seal and whether there are foreign objects

Checking whether the seal of the emulsifier is intact is a crucial matter. The seal is equivalent to a sealing ring for the emulsifier, playing a sealing role to prevent air leakage during operation. Of course, in addition to checking whether the seal is intact, it is also necessary to grasp whether there are any debris inside the machine. This cannot be ignored whether it is a new device that has never been used or an old device that has been used multiple times. There may not be any material impurities inside the new equipment, but it is very likely that metal shavings have been missed during the production process. If not thoroughly cleaned, it will definitely affect the operation of the equipment;

　　Installation and commissioning work 2 of high shear emulsifier: check the power connection

Simply put, an emulsifier is a standalone unit, but in material mixing, it does not exist as an individual, but as a combined system. It relies on a motor to provide power, a cooling machine to provide cooling function, and so on. The linkage between these devices needs to be established on the wiring system, and power connection is the basic work. If the basic work is not done well, it will also affect the ultimate use of the emulsifier. Therefore, checking the power connection work is an important thing. In addition to checking whether the power switch is normal, it is also necessary to check whether the motor and other equipment are damaged during operation;

　　Installation and commissioning work three of high shear emulsifier: cleaning work

Why is it said that cleaning work is installation and debugging work? It is not difficult to explain. When the emulsifier is connected to the pipeline, it is generally necessary to clean the pipeline in the pipeline. After confirming that there are no impurities in each pipeline, the next step of work can be carried out;

As mentioned above, proper installation and debugging of high shear emulsifiers in the early stages of use can not only reduce equipment operation failures, but also help improve emulsification performance, enhance the value of use for equipment users, and bring economic benefits to industry development.