Product Features

1. A hard wall structure composed of stainless steel and tempered glass, with an internal environment of dynamic grade 100
2. Use gloves for operation, which can be thick and resistant to damage or thin and have a high tactile feel
3. Choose H14 high-efficiency filter and conduct PAO scanning leak detection test
4. Hydrogen peroxide can achieve a spore killing effect of 10 ⁶ - log on the air and exposed surfaces inside the isolator
5. Safe entry and exit of items can be achieved through various methods, such as airlocks, transfer cabins with RTP systems, etc
6. The isolator can be equipped with a built-in power supply, as well as compressed air and cleaning water connections with valves, for inlet and outlet water
7. The system is equipped with a Siemens logic controller (PLC) for fully automated control of pressure and air supply, and has a pressure loss alarm function
8.10-inch touchscreen control/12.1-inch industrial tablet NetSCAD system, compliant with the 2010 GMP computer system validation requirements

Technical Specifications

Maximum power of equipment: ≤ 3000W
Touch screen size: 12.1-inch industrial control screen
Power supply voltage: 220V ± 22V, 50 ± 1Hz
Isolator cabin airflow model: vertical unidirectional flow

Cabin pressure control range: -80 to+80Pa adjustable range
Gas source: filtered clean compressed air or nitrogen, gas source pressure 0.4-0.6MPa
Cabin leakage rate: Conduct a pressure holding test at a positive pressure of 80Pa, and the overall leakage rate of the isolator cabin is less than 0.5% vol/hour
Humidity resolution: 0.1%
Temperature resolution: 0.1 ℃
Wind speed: 0.36-0.54m/s
Data Tracking: Supports
Electronic Signature: Supports
Online cabin leak detection: supported
Online glove leak detection: support

Dimensions: 3130 × 1250 × 2385mm

Airlock chamber space: 600 × 580 × 740mm

Operating space: 1790 × 1050 × 740mm