Product Features

1. A hard wall structure composed of stainless steel and tempered glass, with an internal environment of dynamic grade 100
2. Use gloves for operation, which can be thick and resistant to damage or thin and have a high tactile feel
3. Choose H14 high-efficiency filter and conduct PAO scanning leak detection test
4. Hydrogen peroxide can achieve a spore killing effect of 10 ⁶ - log on the air and exposed surfaces inside the isolator
5. Safe entry and exit of items can be achieved through various methods, such as airlocks, transfer cabins with RTP systems, etc
6. The isolator can be equipped with a built-in power supply, as well as compressed air and cleaning water connections with valves, for inlet and outlet water
7. The system is equipped with a Siemens logic controller (PLC) for fully automated control of pressure and air supply, and has a pressure loss alarm function
8.10-inch touchscreen control/12.1-inch industrial tablet NetSCAD system, compliant with the 2010 GMP computer system validation requirements

Technical Specifications

Power supply voltage: 220V ± 22V, 50 ± 1Hz
Maximum power of equipment: ≤ 3000W
Touch screen size: 12.1-inch industrial control screen
Cabin pressure control range: adjustable from -80 to 80Pa
Humidity resolution: 0.1%
Temperature resolution: 0.1 ℃
Pressure resolution: 0.1 Pa
Isolator cabin airflow model: vertical unidirectional flow
Wind speed: 0.36-0.54m/s
Cabin leakage rate: Conduct a pressure holding test at a positive pressure of 60Pa, and the overall leakage rate of the isolator cabin is less than 0.5% vol/hour
Gas source: filtered clean compressed air or nitrogen, gas source pressure 0.4-0.6MPa

Dimensions: 243 × 110 × 217.5cm

Operating space: 179 × 67 × 74cm

Airlock chamber space: 60 × 58 × 74cm