Hard cabin sterile isolation system
Aseptic inspection isolator is a sealed system that achieves safe air exchange through a fan filter unit (high-efficiency filter, HEPA) in a sealed environment, achieving internal
Continuous control of particles and microorganisms in the environment. When sealed, the internal surface has already undergone biological decontamination treatment. Use fast transfer channels or airlocks for aseptic transfer and transfer of materials,
Ensure protection between the operator and the medication.
Product Features
-
A hard wall structure composed of stainless steel and tempered glass, with a dynamic internal environment of Alevel
- Use gloves for operation, which can be thick and resistant to damage or thin and have a high tactile feel
- Select H14 high-efficiency filter and pass PAO scanning leak detection test
-
Hydrogen peroxide can reach 106 log sprouts on the air and exposed surfaces inside the isolatorSpore killing efficacy
-
It can be done in various ways, such as airlock chambers, transfer cabins with RTP systemsWait, achieve safe entry and exit of items
-
The isolator can be equipped with a built-in power supply or a compressed air with a valveGas connector and cleaning water connector, used for water inlet and air inlet
-
The system is equipped with a Siemens logic controller (PLC) for fully automated pressure controlPower, air supply, and pressure loss alarm function
-
10 inch touchscreen control/12.1-inch industrial tablet computer NetsCAD seriesCompliant with the 2010 version of GMP computer system validation requirements
Technical Specifications
- Power supply voltage: 220V ± 22V, 50 ± 1Hz
- Maximum power of equipment: ≤ 3000W
- Touch screen size: 12.1-inch industrial control screen
- Cabin pressure control range: adjustable from -80 to 80Pa
- Humidity resolution: 0.1%
- Temperature resolution: 0.1 ℃
- Pressure resolution: 0.1 Pa
- Isolator cabin airflow model: vertical unidirectional flow
- Wind speed: 0.36-0.54m/s
- Cabin leakage rate: Conduct a pressure holding test at a positive pressure of 60Pa and isolate the cabin
- The overall leakage rate is less than 0.5% vol/hour
- Gas source: filtered clean compressed air or nitrogen, gas source pressure 0.4
- ～0.6MPa
- Dimensions: 2830 × 1065 × 2385mm