Ball valves are mainly used in pipelines to cut off, distribute, and change the flow direction of media. They only require a 90 degree rotation and a small rotational torque to close tightly. Ball valves are suitable for use as switches and shut-off valves, with V-shaped ball valves.

Characteristics of Three piece Quick Install Ball Valve:

1. Wear resistance: Due to the alloy steel spray welding of the valve core and alloy steel overlay welding of the sealing ring of the hard sealed ball valve, there will not be too much wear and tear when the hard sealed ball valve is opened and closed. (Its hardness coefficient is 65-70)

2. Good sealing performance: Due to the use of manual grinding for the sealing of hard sealed ball valves, they can only be used when the valve core matches the sealing ring. So his sealing performance is reliable.

3. Light switch: Due to the use of a spring at the bottom of the sealing ring of the hard sealed ball valve to tightly hold the sealing ring and valve core together, the switch is very light when external forces exceed the pre tightening force of the spring.

4. Long service life: It has been widely used in various sectors such as petroleum, chemical, power generation, papermaking, atomic energy, aviation, rockets, as well as in people's daily lives.

5. Easy to operate and use: Pneumatic ball valves have a compact structure, reliable sealing, simple structure, and easy maintenance. The sealing surface and spherical surface are often in a closed state, which is not easily eroded by the medium. They are easy to operate and maintain and are suitable for general working media such as water, solvents, acids, and natural gas. They are mainly used to cut off or connect media in pipelines, and can also be used for fluid regulation and control.