High speed mixing granulatorSupported by the body of the machine, the pot serves as the container, and the stirring and cutting blades are driven by power. The material is stirred with a stirring blade to make it roll and mix evenly in a short period of time. Then, the cutting blades are used to make particles, which are discharged from the discharge port. By changing the speed of the stirring and cutting blades, the equipment can obtain particles of different sizes. It has a stable, safe, and reliable design that meets GMP standards.High speed mixing granulatorAdopting a horizontal cylindrical structure, the structure is reasonable.
Inflatable sealed drive shaft, can be switched to water during cleaning.
Fluidized granulation results in approximately spherical particles with good flowability.
Reduce adhesive by 25% compared to traditional processes and shorten drying time.
Each batch is dry mixed for 2 minutes and pelletized for 1-4 minutes, which increases efficiency by 4-5 times compared to traditional processes.
Completed in the same closed container, dry mixing wet mixing granulation, process reduction, in compliance with GMP standards.
The entire operation has strict safety protection measures.
Process flow: Powder - dry mixing - adhesive - wet mixing - cutting - granules.