Intelligent injector operation video

1、 The intelligent sprayer for rainwater storage tank is an intelligent flushing device designed with a door needle for the storage tank. Using gas-liquid mixture to aerate and stir the sewage containing sediment in the storage tank, and then pumping it out after the sediment in the water becomes suspended. After the sewage in the storage tank is emptied, the bottom of the storage tank is flushed. The intelligent sprayer of the rainwater storage tank can not only automatically flush the surface, but also perform fixed-point flushing. 2、 Product Innovation (1) Compared to traditional injectors, this research and development equipment has added airbags, which keep the water flow in a turbulent state during operation, stabilizing the equipment and facilitating biochemical reactions; (2) The rotation angle of the equipment can be designed and modified according to the actual needs of the customer to meet the requirements of normal operation in environments where it cannot function properly. The intelligent sprayer system for rainwater storage tank includes: the intelligent sprayer body for rainwater storage tank, liquid level gauge, high-definition camera, and control system. The intelligent sprayer body of the rainwater storage tank mainly consists of a rotary drive, a fixed support seat, a water pump, a rotary joint, an outlet pipe, a gas-liquid mixing chamber, a nozzle, an inlet pipe, etc. The equipment mainly uses the Venturi principle as the design basis. Working principle: When there is a certain depth of water in the reservoir, the intelligent sprayer of the rainwater storage tank, under the control of the control system, will spray a gas-liquid mixture every period of time to aerate the water in the storage tank, degrade the COD content in the water, and minimize the residual odor in the storage tank. When the submersible sewage pump at the bottom of the storage tank is discharging water, when the configured liquid level gauge detects that the water level of the storage tank reaches the set water level, the intelligent control system controls the nozzle of the intelligent sprayer of the rainwater storage tank to start rotating within the range of 0-260 ° while stirring the storage tank, so that the sediment at the bottom of the tank is in a suspended state. At the same time, the submersible sewage pump extracts suspended sewage to prevent suspended solids from depositing again at the bottom of the pool. When the water in the reservoir is about to be drained, the intelligent sprayer of the rainwater storage tank uses the water in the collection pit of the storage tank to vigorously flush the bottom of the storage tank. The flushed sewage is discharged outside the storage tank through the submersible sewage pump in the collection pit of the storage tank. The high-definition camera configured in the storage tank can automatically capture the bottom image of the storage tank, and through the intelligent control system, the captured image is intelligently gridded in the area. When it senses that there is uncleaned dirt in a certain area, it will automatically

Send a control signal to control the intelligent sprayer of the rainwater storage tank to perform fixed-point flushing of the pollutants in the area.