With the urgent demand for high-efficiency and energy-saving equipment in the pharmaceutical and chemical industries, the spherical crushing and drying integrated machine is gradually replacing traditional drying equipment with its structural design and multifunctional integration. This device solves the industry pain points of material agglomeration and low thermal efficiency through the synergistic effect of spherical cavity, crushing device and drying system.
The daily maintenance of the multifunctional spherical crushing and drying integrated machine mainly includes the following aspects:
1. Regularly clean and inspect all parts of the equipment:
Clean the ash and dirt from the heater, fan, container, drying room and outside, cylinder and control cabinet to ensure the heat dissipation performance and normal operation of the equipment.
Check whether the fixing nuts and all fastening components of the movable gear plate are loose to ensure the stability of the equipment.
Regularly clean the inside and outside of the crusher, remove accumulated dust and impurities, and ensure smooth operation of the machine.
Clean the powder on the nozzle and the inner wall of the grinding chamber to avoid affecting the crushing effect.
2. Maintenance of lubrication system:
Regularly check whether the lubricating oil in the oil mist device is clean and sufficient, and replace it if necessary.
Check the location of the lubricating oil cup, inject appropriate lubricating oil before starting up, and increase the frequency of refueling for equipment that works continuously.
Ensure the normal operation of the cooling system, prevent overheating and damage to components, and guarantee production efficiency.
3. Maintenance of electrical system:
Before each startup, check whether the electrical control is normal, whether the grounding is sufficient, and ensure that all control switches and sensors are working properly.
Regularly inspect the electrical system to ensure reliable electrical connections and avoid production disruptions caused by electrical failures.
• Control cabinet maintenance: In environments with high levels of dust, pay attention to dust prevention, keep the control cabinet door closed to prevent dust from entering, and regularly clean the dust, especially the exposed electrical contacts in the air, to prevent poor contact.
4. Maintenance of the intake system:
Regularly clean foreign objects and dust at the air inlet to ensure the cleanliness of the air duct and filter bag.
Check the working status and performance of valves on the pipeline, and replace or repair them promptly if damaged.
5. Replacement and maintenance of vulnerable parts:
Regularly inspect and replace cutting tools to ensure their sharpness, consistent particle size, and controllable product quality.
Check the degree of wear of easily worn parts and replace worn parts at any time.
The needle wheel reducer in the discharge system needs to be maintained every six months. For specific methods, please refer to its manual.
Through the above maintenance measures, the stable operation and efficient production of the multifunctional spherical crushing and drying integrated machine can be ensured.