High speed traditional Chinese medicine tablet press is a commonly used tablet press product, suitable for mass production and pressing of various round tablets, sugar tablets, calcium tablets, etc. It is widely used in industries such as chemical, metallurgy, and pharmaceuticals. Should users use high-speed traditional Chinese medicine tablet press products? Today, the editor will introduce in detail the precautions for using a high-speed traditional Chinese medicine tablet press.

Before using the high-speed traditional Chinese medicine tablet press, it is necessary to repeatedly check the quality of the punching die, whether there are missing edges, cracks, deformations, and whether the tightness does not meet the requirements, and whether the device is complete and good before working. Check whether the powder of the granular raw material is dry and whether the powder content in the particles does not exceed 10%. If it is unqualified, do not use it hard, otherwise it will affect the normal operation and service life of the machine and the loss of raw materials.

For the initial test run, the pressure adjustment control indicator should be placed in the "0" position, the powder should be poured into the hopper, and the test handwheel should be manually rotated to adjust the filling and pressure, gradually increasing the weight and hardness of the tablets to meet the requirements of the finished product. Then, the electric motor should be turned on first, and then the clutch should be turned on for formal production. During the production process, the quality of the tablets should be checked regularly to see if they meet the requirements, and adjustments should be made if necessary.

The choice of speed is correctHigh speed traditional Chinese medicine tablet pressThe service life has a direct impact. Due to the nature, viscosity, sheet size, and pressure of the raw materials, which cannot be uniformly regulated in use, the structure of this machine can be divided into fast and slow belt pulley transformation methods. The slow speed uses the Yangtze River Delta to drive the outer rope pulley, which is suitable for pressing minerals, plants, grass, and other materials that are difficult to form quickly. The fast speed uses the short triangle to drive the inner rope pulley, which is suitable for pressing adhesive, lubricating, and easy to form materials. Therefore, the user must decide according to the actual situation.

The manager of the high-speed traditional Chinese medicine tablet press must be familiar with the technical performance, internal structure, and control mechanism of the machine, and must not leave the work site during operation to prevent damage to the machine due to malfunctions and ensure safe production. During use, always pay attention to whether the machine noise is normal. If there is a sharp sound, stop the machine immediately for inspection and elimination. Do not use it forcefully.

The method of adjusting the speed of a high-speed Chinese medicine tablet press is relatively simple. Simply rotate the adjustment knob clockwise to increase the speed, and vice versa to decrease the speed. The key is the choice of speed, which has a direct impact on the machine's service life, tablet weight, and tablet quality. Due to the properties, viscosity, moisture content, particle size distribution, and sheet size of particles, as well as different pressures, a unified determination cannot be made and can only be made based on actual conditions and the experience of technical personnel. However, in general, if pressing materials with high mineral and plant fiber content, large diameter, and poor viscosity, it is advisable to use low pressure pressing.High speed traditional Chinese medicine tablet pressHigh speed generally does not exceed 25 revolutions per minute. On the contrary, if suppressing particles with good viscosity, fluidity, small particle size, and easy formation, a higher speed can be chosen. The optimal compression speed can be obtained through pressure testing and adjustment. It is recommended that the rotational speed during continuous compression should not exceed the high fixed speed