Fully automatic drip pill machineThe production line consists of a 25L ingredient tank, an experimental drip pill host, a centrifugal degreaser, and a screening dryer. The 25L seasoning jar is installed on the same chassis as the main unit, with good overall integrity. The host is connected to the centrifugal degreaser through a conveyor belt, forming an automated production line. The entire production line adopts multiple technologies, with automatic feeding of the host, adjustable parameters, easy lifting and lowering of the columns, automatic temperature control, adjustable molding liquid level height, and good refrigeration effect. The machine is equipped with a 12 hole dropper for natural self weight dripping, and can also be equipped with a dropper for online adjustment of dripping large pills. According to user requirements, touch screen and PLC control can be used to continuously dispense 5-600mg drop pills. This machine can be used as both an experimental machine and for industrial production, making it an ideal small batch production line for drop pills.

Below, the editor will briefly introduce the operating precautions of the fully automatic drip pill machine, as follows:

When cleaning the main unit of the drip pill machine, the air pressure of the equipment must be reduced.

When dropping pills, if the air pressure is too high, it is easy to form strips during feeding, and if it does not form pills, it can also cause blockage.

When using a dropping pill machine, the upper and lower limits of the temperature of the built-in chemical tank oil cylinder generally differ by ten degrees Celsius.

When feeding, if the air pressure is too high, it will cause the pipeline above to be blocked.

When the indoor temperature is high, the upper limit of the refrigeration temperature is five degrees Celsius, and the lower limit is four degrees Celsius. Generally, it is below ten degrees Celsius, and the temperature difference between the upper and lower limits is usually five degrees Celsius.