Tripod centrifugeAccording to the assembly method, it can be divided into two types of models, one is a three legged centrifuge with a foundation, and the other is a three legged centrifugeUnbounded centrifugeAlso known as earthquake resistant no foundation centrifuge, let's explain the differences between these two types of centrifuges separately below.
Everyone knows that after purchasing a tripod centrifuge, it needs to be installed and debugged before use. The so-called "foundation" of a basic centrifuge refers to pouring a foundation on the ground or workplace in advance to fix the centrifuge, and fixing the centrifuge at a certain point to work. This can arrange space and organize production reasonably. This type of basic centrifuge is generally light in weight, and if the foundation is not properly laid, it may cause vibration of the centrifuge due to uneven feeding, resulting in irregular movement of the centrifuge on the ground. When installing the centrifuge, you can also read“Key points for installation of tripod centrifuge”This article is for learning.
The three legged seismic centrifuge without a foundation does not require installation. After purchase, it can be used by connecting the power and debugging. The centrifuge is easy to move, and the weight of this type of centrifuge is much heavier than that without a foundation. Therefore, centrifuges generally do not have problems with foundation centrifuges. Rubber isolators are installed under the three landing feet of the centrifuge to better adhere to the ground and reduce the vibration generated during operation.