Hammer crushers mainly rely on impact to crush materials. When the material enters the crusher, it will be crushed by the impact of the high-speed rotating hammer head. The crushed material will then gain kinetic energy and rush towards the baffle, screen and other components inside the frame at high speed, colliding with each other to achieve multiple crushing. Materials smaller than the gap between the sieve bars will be discharged from the gap, while larger materials will be subjected to hammer impact, grinding, and squeezing again on the sieve bars until they reach the desired particle size and are extruded from the gap.
The main components of a hammer crusher
The hammer crusher is mainly composed of components such as feed inlet, electric motor, rotor, hammer head, screen plate, screen frame, bearing platform, fixed blade platform, and discharge outlet. Among them, the rotor system is the core component, assembled from the main shaft, disc, hammer plate, etc. When the motor drives the rotor through the pulley, the hammer head rotates at high speed, generating a strong striking force.
Hammer crusherOperation and Maintenance
1. Usage tips:
Select appropriate crushing materials to ensure that their hardness and humidity meet the requirements.
Adjust the size of the discharge port as needed to achieve optimal crushing effect.
Regularly maintain the motor and belt to ensure their normal operation.
Clean the crushing chamber promptly after use to prevent the accumulation of debris.
2. Maintenance points:
Regularly check whether the various components of the machine, such as the toothed plate and hammer head, are intact, and replace damaged parts in a timely manner.
•Regularly replace lubricating oil to ensure good lubrication of all components.
•Clean the filter and radiator to prevent dust and heat accumulation from affecting equipment performance.
•Pay attention to the operation status of the equipment, and stop the machine for maintenance in a timely manner if there are any abnormal situations.
•Regularly conduct equipment inspections to ensure that the equipment meets usage requirements.