The fully automatic rotary tablet press integrates the technical features of domestic fully automatic high-speed rotary fully automatic high number rotary tablet presses, and has made significant improvements in machine structure and operation control. The machine structure adopts a universal seat body, universal appearance, and replaceable punching plate body, thus achieving the interchangeability of multiple models of one machine. The operation control adopts industrial PLC automatic control, leaving a large development space
The operation precautions of the fully automatic rotary tablet press cover multiple aspects such as preparation before operation, start-up and operation, production monitoring, maintenance and safety emergency, to ensure efficient and safe operation of the equipment and ensure tablet quality.
Preparation before operation:Check the cleanliness of the equipment to ensure there are no residual materials, and clean and disinfect if necessary; Confirm that all components are intact without looseness or wear, and that the lubrication system has sufficient oil volume; Calibrate the gap of the feeder (usually 0.03-0.1 millimeters) and adjust the height of the hopper according to the material characteristics to control the amount of powder.
Equipment startup and operation:Follow the principle of starting at low speed first and then at high speed, observe the operating status, and immediately stop the machine in case of abnormal sound or vibration; When adjusting parameters such as pressure, filling amount, and thickness, gradually adjust and refer to the scale on the gauge to avoid significant changes.
Production process monitoring:Regularly inspect quality indicators such as tablet weight, hardness, and appearance, and adjust process parameters in a timely manner; Pay attention to the operating temperature of the equipment and the reading of the ammeter to prevent overheating or overload; Keep the work environment clean and avoid dust accumulation that affects production.
Maintenance and upkeep:Clean up residual materials inside the equipment after each shift, regularly lubricate moving parts, and inspect electrical circuits; Regularly replace worn parts (such as stamping dies) and avoid deformation when storing stamping dies; Record maintenance activities to track equipment status.
Safety emergency measures:Operators need to wear protective equipment to avoid direct contact with rotating parts; It is strictly prohibited to adjust or clean the equipment during operation. In case of emergency, immediately press the emergency stop button; Stop production and investigate the cause when quality issues or equipment malfunctions are discovered with tablets.
In addition, operators should receive professional training, be familiar with equipment performance and safety regulations, ensure good grounding, avoid using damp or finely grained materials to maintain production stability.