The fully automatic horizontal box packing machine is a highly automated packaging equipment. It can automatically complete tasks such as loading products into boxes and sealing box covers. During the use of this device, it is necessary to strictly follow the operating procedures and maintenance requirements to ensure the normal operation of the machine and extend its service life. Today, the editor will provide a detailed introduction to the operating procedures of the fully automatic horizontal box packing machine.
1、 Preparation before startup
1. Confirm whether the machine's circuit is connected stably and whether the electrical equipment is turned on.
2. Check if the lubricating oil and lubrication parts are sufficient.
3. Check for any obstacles around the machine and remove them.
4. Check if the feeding and retrieving ports of the machine are unobstructed.
5. Before starting up, turn on the emergency stop switch to ensure that the machine is in a completely stopped state.
2、 Start the device
1. Press the start button to start the machine.
2. After starting the machine, observe whether there is any abnormal noise or abnormality. If there is any abnormality, stop the machine immediately.
3. After starting the machine, enter 'manual mode' for debugging and check if it is working properly.
4. During the debugging process, special attention should be paid to safety, and observation and operation of the machine should not be relaxed.
5. After debugging, press the 'Auto Mode' button and the machine will start working normally.
3、 Operation precautions
1. Operators should be familiar with the structure and working principle of the machine.
2. Operators should clean their hands thoroughly to avoid contaminating the machine and affecting its normal operation.
3. Operators are prohibited from reaching into the interior of the machine for maintenance or disassembly. Any machine maintenance must be operated by professional personnel.
4. Operators should strengthen their regular inspection of machines and their awareness of machine maintenance and upkeep.