Sanitary grade centrifugal pumps are suitable for standard load applications, CIP solutions, and are suitable for use in food, dairy, beverage, personal care products, light chemical, and water industries. The pump is suitable for CIP cleaning, with large internal space and washable shaft seals. Each pump suitable for sanitary applications has a stainless steel casing cover for motor protection, and each complete pump set is equipped with four adjustable stainless steel support feet.
A sanitary centrifugal pump mainly consists of a pump body, pump seat, and an electric motor Each part is connected by bolts, and the support feet of the base can be adjusted freely for easy installation without the need for a fixed installation foundation. During installation, the outlet pipe can be installed vertically or horizontally according to different needs. The centrifugal pump adopts a smooth transition, rigid structure, and thick wall design. In terms of material selection, all parts in contact with the material, such as the body, pump cover, impeller, etc., are made of AIS1316 or AIS1304 stainless steel. The mechanical shaft seal is customized with high-quality stainless steel and silicon carbide. Greatly improved wear resistance and moisturizing properties, extending the service life. During the production of centrifugal pumps, the pump body and impeller are precision cast as a whole, and all parts are surface treated. Special fixtures are used to ensure dimensional clearance during installation. The shaft seal adopts an open structure, so even if there is a small leakage at the shaft seal, it can be observed in a timely manner. Even if not noticed for a short period of time, it will not fill up the motor. This ensures the service life of the electric motor.
The impeller and shaft sleeve of the sanitary centrifugal pump are precision cast and directly installed on the motor output shaft, with high strength, design *, easy installation, high precision, ensuring concentricity, solving vibration, and improving pump strength. The precision casting of the impeller and shaft sleeve solves the wear of the impeller and wheel hub. The shaft sleeve is designed to deepen the impeller inlet cavity at the rear end, improving the pump's inlet characteristics and avoiding cavitation. The impeller is open, making cleaning convenient.
The above is the general content of this article. After reading this article, have you learned what you want to know? If you want to learn more, please follow our website. We will regularly update some new content for everyone to browse and read.