1. Adopting square TU2 purple copper plate vacuum plating/black crystal ceramic panel film heating surface heating, beautiful and corrosion-resistant.
The heating method of 2 * (already applied) can reach a maximum surface temperature of 350 ℃.
3. Digital speed display function.
4. The temperature control adopts fuzzy PID control algorithm, dual screen digital display, self-tuning function, with high measurement accuracy, small temperature surge, single key touch operation, internal and external thermocouple temperature measurement, thyristor control output, 160-240V wide voltage power supply, and has a break protection function.
5. Heating and stirring can be performed on 50-10000ml standard or non-standard reaction bottles.
6. Adopting the German PAPST series DC brushless motor, it has stable performance, low noise, long service life, and no spark generation.
7. The shell adopts a one-time flame retardant reinforced PBT injection molded shell, which is heat-resistant, corrosion-resistant, and has good insulation performance.
The 8.30 ° inclined control panel is suitable for both sitting and standing perspectives.
9. Infinite speed regulation, smooth at low speeds, and strong at high speeds.
Instructions for using the intelligent digital magnetic heating plate:
1. Fix the upright pole in the screw hole on the upper back of the mixer, adjust the height of the cross clamp, fix the reaction bottle with the clamp, put in a suitable mixer, insert the power supply~220 ∨, and turn on the switch.
2. Adjust the "mixing" knob clockwise and adjust it to the appropriate position according to the speed display for mixing.
When stirring large or viscous solutions, the knob can be adjusted appropriately to increase the stirring force.
4. Temperature setting: Press and hold the "▲" or "▼" keys to quickly set the desired heating temperature, such as 100 ℃. When the green light is on, it indicates heating, and when the green light is off, it indicates stopping. The microcomputer will determine the heating amount based on the temperature difference between the set temperature and the current temperature, ensuring that there is no temperature shock and that the heating is done in one go. The heating process will be easily completed by maintaining a balance between the set value and the displayed value with a temperature difference of ± 1 ℃.
5. Self setting function: Activating the self setting function can shorten the heating time, reduce the flushing temperature, and achieve balance when there is no regularity between different heating stages or heating power and the amount of solution. However, after changing the heating medium or heating conditions, the self setting should be reset.
6. Start self-tuning: Press and hold the shift key "?" for 5 seconds, and the setting window number will flash to enter the self-tuning state. After three temperature pulses, the number will stop flashing, indicating the end of self-tuning and can be used. However, self-tuning needs to be used during initial heating, and the self-tuning performed midway may not be accurate.
7. There is a rubber plug below the mixer to protect the external thermocouple socket from corrosion, rust, and to conduct the internal wires. If unplugged, the internal probe will disconnect and the machine will stop working. If using an external thermocouple, the plug should be removed and stored. The external thermocouple plug should be inserted into the socket and the nut should be locked. Then, the stainless steel probe should be placed in the solution for temperature control and heating.
8. The appliance is equipped with a break protection function. When the thermocouple connection is poor, the display window will show "hhhh" green light and turn off, and the appliance will stop heating. It needs to be checked before use.
Intelligent digital magnetic stirring heating plate ZNCL-BS
ZNCLD digital timed magnetic stirrer (heating pot)
Multi point magnetic stirring heating plate ZNCL-DS5/ZNCL-DS10