-
E-mail
815872569@qq.com
-
Phone
13140012354
-
Address
Zhengzhou, Henan
Zhengzhou Guorun Intelligent Technology Co., Ltd
Paper deformation and frequent static electricity in paper mills? High pressure micro fog humidifier to save the scene
Date: 2025-07-31Read: 4
Humidity control is really important in paper mills! If not controlled properly, it can affect paper quality and production efficiency in minutes. The high-pressure micro fog humidifier is like hiring an "environmental manager" for the workshop, helping us solve many production problems and save a lot of costs.
Let's talk about the problem of paper deformation first. If the workshop is too dry, the fibers used for papermaking will shrink like sponges that have been drained of moisture. The paper made is sometimes thick and sometimes thin, with uneven surfaces and easy cracking when rolled up. Encountering a high-speed production line, deformed paper gets stuck in the machine and needs to be stopped for maintenance, resulting in a significant drop in output. We used a high-pressure micro fog humidifier to stabilize the humidity in the workshop at 50% -60%. After drinking enough water, we obediently listened and produced paper that was smooth and even.
Let's talk about static electricity and dust again. Static electricity runs rampant in the workshop, equipment often gets angry, and paper surfaces are prone to dust and debris. The water mist sprayed out by the high-pressure micro mist humidifier is like a "static electricity killer", which can neutralize static electricity with just one hand, and the dust also loses its "foothold". After the humidity rises, the static electricity generated by the friction between the paper and the machine decreases, the paper rolls will not stick together, and the cutting will be more accurate. The number of equipment failures decreases linearly.
In addition, if the humidity is appropriate, the physical fitness of the paper will also improve. The humidity is too low, the pulp dries too quickly, the fibers are not tightly bonded, and the paper breaks easily when pulled. With the high-pressure micro fog humidifier, the humidity can be steadily controlled, and the fibers can be fully "wrapped into clusters", resulting in paper with strong toughness and sufficient tensile strength.
Such practical equipment is simply a good helper for the production of paper mills! If you want to know how to customize a suitable humidification solution for your own factory, feel free to chat anytime!