ZLGJ-10FDelectric heatingTechnical parameters of ordinary vacuum freeze dryer

Main Features：

1.The drying room door and cold trap door are made of aviation grade acrylic material, which has high strength and no leakage.

2.The seven inch true color industrial touch screen has high control accuracy, stable performance, and can be easily operated without the need for an instruction manual.

3. ImportCompressor, efficient and energy-saving, more stable

4.Filling valve, drain valve, using high vacuum safety diaphragm valve, can be connected to inert gas, extending the shelf life of materials.

5.Manual and automatic mode selection, manual mode is used to explore the process; Automatic mode is used for mature processes with one click operation.

6.Monitoring screen; Real time monitoring of partition temperature, cold trap temperature, vacuum degree and other operating conditions.

7.Data recording mode, multiple options for data recording, data export and other functions.

8.The temperature control mode can be switched at any time; Standard temperature control method and smooth temperature control method.

9.Freeze drying curve query function, allowing you to view temperature, vacuum degree and other curves at any time9The line.

10.You can set user level permission passwords and access operation management based on permissions.

11.This machine can store40Freeze drying process, each process can be set36Section.

12.The cold trap has a pre freezing function, saving the cost of a low-temperature refrigerator.

13.The French Taikang compressor has low noise, high power, and long service life.

14.Mixing environmentally friendly refrigerants, with a large green cooling capacity.

15.Built in heat exchanger effectively reduces the temperature of the cold trap and has strong water capture capability

16.Pre freezing and drying integrated.

17.Partition electric heating method,The required heat for drying can be adjusted.

technical indicators：

1. Freeze dried area of the board layer0.1-0.2㎡。

2. Tray electric heating:-60℃~65℃；

3. Tray electric heating provides heat for sublimation.

4. PID algorithm controls temperature accuracy.

5. Cold trap water capture capacity: 4-6kg/24 hours

6.Cold trap temperature,<-60℃。

7.Effective number of board layers1+1 floor Two trays with dimensions of 260 * 390mm

8.ultimate vacuumBelow 5Pa (unloaded)

9.Power requirements:AC220V 50HZ total power: ≤ 2000W