The structure and function of the drug stability test chamber are composed of a box body, inner chamber (working room), temperature and humidity control device, heating and cooling system, humidification and gas circulation device, lighting system, etc.
1. This machine has a vertical frame structure, and the box is made of high-quality thin steel plate by punching. The exterior is sprayed with plastic, with bright colors and a beautiful appearance. The controller, various switches, buttons, and display are all installed on the right side of the box, making operation intuitive and convenient;
2. Adopting a mirror stainless steel inner liner, the four corner semi-circular arc is easy to clean, and the spacing between the shelves inside the box is adjustable; Fill the space between the outer box and the inner box with polyester foam material to ensure the insulation performance of the equipment;
3. This product uses electronic temperature and humidity sensors, greatly improving the service life and control accuracy of the sensors;
4. The device is equipped with a printer to print operating temperature and humidity data, and the controller records various data, which can be exported through a USB flash drive;
5. The equipment is equipped with an independent temperature limit controller, which automatically interrupts heating when the limit temperature is exceeded, ensuring the safe conduct of the experiment and preventing accidents;
6. Touch screen controls temperature and humidity, and ensures the stability and reliability of equipment operation through sensor detection;
7. There are cold and hot air ducts inside the box, which are operated by fans to enhance gas circulation and improve the uniformity of temperature and humidity in the working room;
8. There are power supply lines, drain valves, and overflow ports at the bottom of the back of the device, and a main power switch in the middle of the back; There is a water inlet in the middle of the left side, equipped with a water tank and a power socket for the pumping pump; On the upper right side of the front, there are components such as a controller, printer, USB interface, power interface, power switch, emergency stop button, etc;
9. The drug stability test box is equipped with a lighting device system inside, and there is an observation window on the box for easy observation of the operation situation;
10. Equipped with functions such as over temperature alarm, compressor delay, and overheat protection;
11. There is a test hole with a diameter of q50mm on the left side of the box, which provides convenience for users to conduct relevant tests.