The linear motor fiber laser cutting machine uses imported international advanced fiber lasers to output high-energy density laser beams, which are focused on the surface of the workpiece to instantly vaporize the area irradiated by the ultrafine focal spot on the workpiece. The linear motor drive system moves the spot irradiation position to achieve automatic cutting. It is a high-tech equipment that integrates advanced fiber laser technology, magnetic levitation technology, numerical control technology, and precision mechanical technology

The linear motor fiber laser cutting machine uses imported international advanced fiber lasers to output high-energy density laser beams, which are focused on the surface of the workpiece
Instantly vaporize the area of the workpiece illuminated by the ultrafine focal spot, and achieve automatic cutting by moving the spot illumination position through a linear motor drive system.
It is a high-tech equipment that integrates advanced fiber laser technology, magnetic levitation technology, numerical control technology, and precision mechanical technology

Structural characteristics of 1000W linear motor laser cutting machine
Fast speed, high acceleration; High cutting accuracy and repeatability positioning accuracy; No mechanical wear and tear, long lifespan; The transmission system has a simple structure and high efficiency;
Low noise, quiet operation

1000W linear motor laser cutting machine application industry
Jewelry, glasses, electronic components, clocks, precision machinery, craft gifts


Advantages of 1000W linear motor laser cutting machine
1. Zero transmission ", high stiffness, linear motor is directly linked to the load, so there is no transmission gap between the motor and the load. In fact
There is also no flexibility.When the linear motor drives the load to operateWhen in motion, the motor displays high dynamic stiffness;
2. High system dynamic performance, in addition to high-speed capability, linear motors also have high processing speeds, which are only limited by system rails and loads;
3. Extremely smooth operation and high positioning accuracy, directly driving a linear motor has lower thrust and speed fluctuations suitable for smooth motion requirements.
The positioning accuracy is only limited by the feedback resolution and can usually reach resolutions below micrometers


Maintenance and after-sales packaging of 1000W linear motor laser cutting machine

When the machine is not working, the marking machine and computer power should be cut off. When the machine is not working, cover the field lens to prevent dust from contaminating the optical lens
2. When the machine is working, the circuit is in a high voltage state. Non professionals should not perform maintenance during startup to avoid electric shock accidents
3. In case of any malfunction of this machine, the power should be cut off immediately. If the device is used for a long time, dust in the air will adhere to the lower surface of the focusing lens, and lighter ones will lower it
The power of the laser affects the marking effect; Severe cases can cause the optical lens to absorb excessive heat and explode. When the marking effect is poor, the focus should be carefully checked
Is the surface of the mirror contaminated. If the surface of the focusing lens is contaminated, the focusing lens should be removed and its lower surface cleaned. Be particularly careful when removing the focusing lens, be careful
Do not damage or fall; At the same time, do not touch the mirror surface of the focusing lens with your hands or other objects. The cleaning method is to mix anhydrous ethanol (analytical grade) with ethanol
Mix ether (analytical grade) in a ratio of 3:1, use a long fiber cotton swab or lens paper to infiltrate the mixture, gently scrub the surface of the lower end of the focusing lens, and wipe one side at a time
The cotton swab or lens paper needs to be replaced once During the operation of the marking machine, do not move it to avoid damaging the machine Do not cover the stack or
Place other items to avoid affecting the heat dissipation of the machine.
1000W Linear Motor Laser Cutting Machine Company Qualification

Beyond Laser provides free installation, debugging, and technical training for customers. Beyond Laser's after-sales service network covers the whole country, responding to customers within 8 hours
Please resolve customer issues within 24 hours. Beyond Laser provides customers with a one-year free warranty and lifetime technical support.