-
Phone
13917099436
-
Address
No. 218 Xianju Road, Jinshan District, Shanghai
Product Categories
Shanghai Soting Intelligent Equipment Co., Ltd
1L Laboratory Electric Lift Glass Vacuum Dispersion Emulsification Homogenization Reactor
NegotiableUpdate on 02/04
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Used for laboratory dispersion, mixing, emulsification, homogenization, and dissolution. The entire reaction process of stirring, homogenization, emulsification, dispersion, mixing, etc. of materials can be observed through a glass kettle under vacuum or pressure conditions. It can simultaneously measure the temperature, pressure, viscosity, pH, and other properties of materials. Materials can also be heated or cooled. 1) The homogenizer emulsifying device of this machine can directly reach the bottom of the kettle and can use the internal circulation of the emulsifying head for emulsification. Using a high-speed emulsification device combined with slow edge scraping
Product Details
Used for laboratory dispersion, mixing, emulsification, homogenization, and dissolution. The entire reaction process of stirring, homogenization, emulsification, dispersion, mixing, etc. of materials can be observed through a glass kettle under vacuum or pressure conditions.
It can simultaneously measure the temperature, pressure, viscosity, pH, and other properties of materials. Materials can also be heated or cooled.
1) The homogenizer emulsifying device of this machine can directly reach the bottom of the kettle and can use the internal circulation of the emulsifying head for emulsification. By using a high-speed emulsification device combined with slow scraping, the raw materials will form a strong circulating floc flow without dead corners. The product can be fully mixed, emulsified, dispersed, and homogenized, forming a good and uniform molecular structure. This type of emulsification system has better emulsification effect than traditional ones.
2) The sandwich structure can directly perform heating and cooling functions, with a spiral guide plate inside for more thorough cooling of the material during cooling.
3) Rotary vane vacuum pumps are not only used for raw material suction, but also save manpower. Adopting vacuum suction, especially for powder materials, to avoid dust flying. The entire process is carried out under vacuum conditions to prevent the formation of bubbles in the material after high-speed mixing, which meets the requirements of hygiene and sterility. It can also be used to remove bubbles, making the product structure more compact and glossy, and achieving a longer shelf life. Water sealed pumps do not produce oil or gas and are suitable for GMP factory standards.
4) Scrapers can be disassembled and assembled without tools, and cleaning and maintenance work can be carried out.
5) The pot lid device is equipped with waterproof and dustproof floodlights and mirrors, making it easy to observe the production situation.
6) This machine has safety protection devices, such as vacuum safety devices, three-phase power safety devices, interlayer pressure safety valves, emergency stop buttons, etc., to ensure safe operation.
7) This unit is manufactured in full compliance with GMP requirements and is currently the leading washing and care production equipment in China
Precision machining technology ensures a high degree of coordination between the rotor and stator. The powerful motor rotates at high speed to create a vacuum between the rotor and stator, and materials are sucked in from the upper and lower parts of the rotor and stator. The strong kinetic energy generates extremely high linear velocity in the rotor, causing the material to undergo strong impact, crushing, centrifugal extrusion, liquid layer friction, and strong shear between the rotor and stator, and then fly out. Under the action of various forces in different directions, strong turbulence is generated. The material undergoes repeated cycles of depolymerization, dispersion, homogenization, refinement, and shearing under appropriate emulsifiers and mature processes for a certain period of time to produce a stable emulsion.
Applied in industries such as pharmaceuticals, cosmetics, lithium batteries, adhesives, etc., it is an ideal choice for laboratory and pilot testing.
Model: STRH-1L
Internal volume: 1200ml
Working volume: 1000ml
Design pressure of glass reaction kettle: -0.0975~0Mpa
Small allowable mixing volume: 100ML
Small allowable dispersion: 400ML
Maximum allowable mixing volume: 1000ml
Power supply: 220V/50Hz
Mixing power: 120W
Mixing speed range: 0-230 revolutions per minute
Dispersion emulsification power: 500w
Idle speed range: 8000~28000rpm
Processing capacity: 100-5000ml
Lifting method: electric lifting
Processing power: 600W Temperature control range 0-100 degrees
Dimensions: 450 × 600 × 1100 (customized equipment may have slight errors)
Standard weight: 45KG
model |
Design volume (L) |
Actual processing capacity (L) |
Mixing power (kw) |
Mixing speed (rpm) |
Vacuum pump power (kw) |
STZJ-10 |
10 |
8 |
0.18 |
0-120 |
0.12 |
STZJ-50 |
50 |
40 |
0.75 |
0-100 |
0.37 |
STZJ-100 |
100 |
100 |
1.1 |
0-100 |
0.37 |
STZJ-200 |
200 |
160 |
2.2 |
0-70 |
0.75 |
STZJ-300 |
300 |
240 |
2.2 |
0-70 |
1.5 |
STZJ-500 |
500 |
400 |
3 |
0-50 |
1.5 |
STZJ-1000 |
1000 |
800 |
7.5 |
0-30 |
3 |
Note: The processing capacity in the table is measured using "water" as the medium, and the selection should be calculated based on parameters such as viscosity and solid-liquid ratio of the product.
*If there are working conditions such as high temperature, high pressure, flammability, explosiveness, corrosiveness, etc., detailed data must be provided for further selection and customization.
*The data and images in this table are subject to change without prior notice. The correct parameters are based on the actual product provided.
*This table does not include all products. For more information, please contact our sales engineer.
