- Phone
-
Address
No. 9 Rantun North Road, Zhengzhou, China
Product Categories
Henan Weike Intelligent Mining Machine Co., Ltd
5X series sand making machine
NegotiableUpdate on 04/30
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
5X series sand making machine
Product Details
01/Product Features
Our company has developed a new 5X sand making machine that integrates three crushing modes. It is a core equipment in the construction, mining, metallurgical industries, as well as in the fields of highways, railways, bridges, hydropower, mineral grinding, and machine-made sand industries both domestically and internationally. The 5X series new sand making machine (centrifugal impact crusher) is widely used in various industries such as metal and non-metal minerals, cement, refractory materials, abrasives, glass raw materials, building aggregates, machine-made sand, metallurgy, etc. Suitable for the fine crushing of various ores and rocks with different hardness, such as iron ore, non-ferrous metal ore, diamond sand, bauxite, quartz sand, brown corundum, perlite, basalt and other high hardness materials.
02/Advantages and highlights
-
Good quality materials provide protection and support
Choose wear-resistant and high-temperature resistant materials from the United States to create the core components. Choose bearings from international brands such as Japan, Sweden, and the United States. High protection level motors with high selection rate and low noise.
-
Minor wear of components
The circumference protection board can be adjusted up and down, improving material utilization and increasing service life by more than 48%. Combination hammerhead, only needs to replace worn hammerheads, reducing usage costs by more than 30%. By using diamond shaped impact blocks and adding secondary hammer heads, the probability of damage to the vertical plate is reduced.
-
Material throughput capability improvement
The optimized design of the deep cavity rotor increases the material throughput by about 30%. Smooth curved design and launch port reduce material flow resistance and significantly improve material throughput.
-
Special structure saves labor and effort
Dual purpose bulk material tray, easy to switch between two feeding methods. Special sealing structure, achieving no oil seal and no oil leakage. The original hydraulic opening device from Japan saves labor and effort in maintenance and repair.
03/parameter list
| model | 5X7615 | 5X8522 | 5X9532 | 5X1145 | ||
| Production capacity (t/h) | Waterfall and central feeding | 150-280 | 240-380 | 350-540 | 500-640 | |
| Whole center feeding | 70-140 | 120-200 | 180-280 | 250-360 | ||
| Maximum feeding size (mm) | Soft material | < 35 | < 40 | < 45 | < 50 | |
| Hard material | < 30 | < 35 | < 40 | < 45 | ||
| Speed (r/min) | 1700-1900 | 1500-1700 | 1300-1510 | 1100-1310 | ||
| Dual motor power (KW) | 150 | 220 | 320 | 440 | ||
| Maximum external dimensions (length x width x height) (mm) | 4100×2330×2300 | 4140×2500×2700 | 4560×2600×2900 | 5100×2790×3320 | ||
| power supply | 380V50Hz | |||||
| Thin oil lubrication station | Dual oil pump motor power (KW) | 2×0.31 | ||||
| Safety protection | Dual oil pumps complement each other to ensure oil supply; Automatic shutdown without oil flow or pressure; Water cooling for cooling; Start the motor heating in winter. | |||||
| Fuel tank heater power (kw) | 2 | |||||
