- Phone
-
Address
No. 9 Rantun North Road, Zhengzhou, China
Product Categories
Henan Weike Intelligent Mining Machine Co., Ltd
6X vertical impact crusher
NegotiableUpdate on 04/30
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
6X vertical impact crusher
Product Details
01/Product Features
The 6X series vertical shaft impact crusher is a new type of sand making and crushing equipment that has absorbed years of research and development experience and technical concepts. It adopts a new four port impeller design structure and a special sealing structure to prevent bearing cylinder oil leakage and other processes. It has multiple national patented technologies and features energy saving, long service life, and wide application. It helps large sand fields gradually move towards large-scale and centralized production to meet the country's requirements for environmental protection and production capacity.
02/Advantages and Highlights
-
brand-new design
The impeller structure adopts a brand new four port design, which increases the material throughput and improves the crushing efficiency of the same material compared to the three port impeller.
-
Process upgrade, cost reduction and efficiency improvement
Adopting the "stone to stone" working mode to reduce the types of wear-resistant materials used and lower customer production costs; By adjusting the structure and process of the impeller part, the service life of the impeller part has been improved compared to previous equipment under the same material crushing conditions.
-
Specially designed with quality assurance
The transmission part of the equipment adopts a special sealing structure to prevent oil leakage from the bearing cylinder. Imported bearings are used to reduce transmission system failures.
-
easy to maintain
New lifting devices have been added to facilitate customer maintenance of equipment, saving labor and effort during repairs; The simple design of the lower structure of the machine effectively prevents blockage of the lower part of the machine when the material contains too much water, reducing downtime.
03/parameter list
| model | Sand making | 整形 | Sand making | 整形 | 主轴转速 (r/min) | power (kw) |
| Feed particle size (mm) | Throughput (t/h) | |||||
| 6X1263 | ≤50 | ≤60 | 454-486 | 545-583 | 900-1200 | 315×2 |
| 6X1150 | ≤45 | ≤55 | 344-368 | 413-442 | 1000-1300 | 250×2 |
| 6X1040 | ≤40 | ≤50 | 264-283 | 317-342 | 1100-1400 | 200×2 |
| 6X9026 | ≤35 | ≤45 | 167-179 | 200-215 | 1200-1500 | 132×2 |
| 6X8018 | ≤30 | ≤40 | 109-117 | 131-140 | 1300-1700 | 90×2 |
Note: The output displayed in this table will vary with changes in the physical characteristic variables of the feed.
