Aerotest Alpha Delger Compressed Gas Quality Tester

Aerotest Alpha Delger Compressed Gas Quality TesterProduct Introduction:

The quality of the Delger Aerotest Alpha in measuring the purity of breathing air in the low-pressure range.

Aerotest Alpha Delger Compressed Gas Quality TesterProduct Features:

1. Detected breathing air:
With the Delger Aerotest Alpha, it is possible to detect the quality of breathing air supplied by compressors or compression cylinders. This detection system ensures reliable detection of the respiratory system and complies with the EN12021 application classification standard.
2. Pollutant detection and measurement:
With the Delger Aerotest Alpha, various potential pollutants such as carbon monoxide, carbon dioxide, water vapor or oil in compressed air can be reliably identified. The measured values can be confirmed simultaneously or separately.
3. Quick and easy to use:
By using a plug connection, the measuring device can be connected to a low-pressure compressed air supply system without the need for a power supply, making it easy to monitor and worry free. In just five minutes, the quick check function can send accurate measurement results and inform the pollution level.
4. Delger oil detection box:
The development of the new Delger oil detection box is specifically designed to detect and check for oil mist in compressed air. In addition to commonly used oils, it is now possible to detect synthetic oils without considering the type or viscosity of the oil. The wide measurement range (with proportional conversion) ensures accurate reading of numerical values.

Product Features:

Used to detect the quality of low-pressure compressed air for respiration, this product has been widely used in major pharmaceutical factories in China.
According to appropriate purification standards, quantitative analysis of pollutants in compressed air can detect the quality of breathing air. Can meet the requirements of different standards (such as DIN3188 standard).
The Delger detection tube can be used to quantitatively detect water vapor H2O, oil, carbon dioxide CO2, carbon monoxide CO, and other pollutants in compressed gases.
The quick plug interface of the detector can be connected to various types of gas supply system interfaces.
All components of the detector can be packed into a hard suitcase for easy carrying and operation.

Technical Specifications:

1 suitcase: length 300mm, width 360mm, height 80mm
2 Weight: 2 kilograms
Working pressure of 3 compressed air bottles: 3-15 bar, in accordance with DIN13260 standard
4 interfaces: fast direct insertion interface
5 flow rates: 0.2 liters/minute and 4.0 liters/minute