All stainless steel vacuum capping machine

All stainless steel vacuum capping machineProduct Introduction:
This device is a vacuum capping machine, designed with an integrated mechanical and electrical system, and controlled by PLC electronic fiber optic sensing *Complete the process of bottle entry, vacuum extraction, cap rotation, and bottle extraction No vacuum is applied without a bottle, and the lid is not rotated when the vacuum pressure is not lower than 3kg negative pressure. This truly ensures that there is no oxygen inside the bottle to ensure that the oil and fat of the material do not oxidize or spoil, there is no bacterial growth, and the shelf life is extended It is an ideal choice for industries such as food, beverage, canned food, and pharmaceuticals.
The device is easy to operate and maintain Easy to clean.

All stainless steel vacuum capping machineMain technical parameters:
Production capacity: 35-40 bottles/minute
Applicable bottle mouth specifications: 38-85mm
Gas source pressure: 0.6-0.8mpa
Vacuum negative pressure: 0.03-0.07mpa
Total power: 0.26kw
Power supply voltage: 220V 50HZ
Dimensions (length x width x height): 2000 x 850 x 1550 (mm)
Weight: 260kg
Vacuum pump: 380v/220v power (Power) 3.5-5.5kw
Pressure of gas storage tank: 0.06-0.09 MPa

Main features:
1. By adopting an open fully sealed vacuum chamber structure and configuring a low-power vacuum pump, high vacuum packaging can be achieved.
2. By using a vacuum detection control program and imported digital vacuum sensors, the lid can be rotated after the vacuum reaches the set value to ensure reliable vacuum levels inside each bottle.
3. Adopting pneumatic drive and adjusting the twisting force of the cover with air pressure, it can ensure high-quality capping effect and zero damage rate.
4. In addition to high vacuum efficiency, the advantages of an open fully sealed vacuum chamber include better applicability to tank shapes, suitable for round and irregular bottles of any size within the applicable range. It solves the problem of replacing bottle shaped parts and can complete bottle shape conversion within 1 minute without the need to replace any parts.
5. The machine action is controlled by PLC and sensors, not in a mechanical linkage form. The machine layout structure is simple and free of oil stains, suitable for production workshops and laboratories with high hygiene requirements.