Automatic filter material tester

NegotiableUpdate on 04/26

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The 8130A automatic filter material tester continues to be the best solution for testing special respiratory filter materials, disposable masks, and various filter materials. Based on TSI, the world's most commonly used 8130 filter material tester, the 8130A filter material tester not only has higher sensitivity and resolution, but also has lower purchase costs due to its new maintainable built-in photometer. Only one instrument is needed to conduct the following tests for your product: US 42 CFR 84, GB2626, JMOL; ISO 16900 -3,EN143; ISO 23328-1 (and other standards)

Product Details

model	8130A
Operation range	environmental pressure	75-110kPa (absolute)
	ambient temperature	10℃-35℃
	Operating humidity	0% -95%, no condensation water
Aerosol detection	technology	Light scattering, laser photometer
Aerosol detection	dynamic range	1.0 µ g/m3 to>200mg/m3
Aerosol flow	technology	Orifice with electronic pressure sensor
	Flow rate through the filter material	Adjustable between 15-110L/min
	accuracy	2% of full scale
Pressure measurement	technology	Electronic pressure sensor
	range	0-150mmH2O(0-1470Pa)
	accuracy	± 1% of full scale
efficiency	Operation range	Measuring particle penetration rates as low as 0.0001% or efficiencies as high as 99.9999%
output	Color touch screen, RS-232
Built in internal pump	Already included
Engineering requirements	power supply	90VAC-250VAC, 50Hz-60Hz, 5.5A continuous current
	compressed air	80PSI, 7scfm (550kPa, 198 standard L/min)
	size	70 x 70 x 147(cm); 28 x 28 x 58(in)
	weight	150kg(330lb)

and Benefits

Meets more standards than any other filter material

Can perform salt and oil testing on the same instrument

ULPA testing achieves an efficiency of up to 99.9999%

Highly consistent test results

Maintain excellent comparability with the test results of the 8130/8127 instrument

New user interface and data recording options

Automatic filter material testing

Number Description

8130A Automatic Filter Media Instrument with Salt and Oil Aerosol Generator

The 8130A automatic filter material tester includes a color touch screen, dual laser photometer, built-in vacuum pump, and a pneumatic filter material fixture for flat filter materials. In addition, it also includes a standard filter membrane test result table and a weighing filter membrane fixture.

attachment

Number Description

8118A Impact Salt Aerosol Generator

1081414R oil aerosol generator

8119 Respirator Leakage Tester Component

8134 xx custom filter material fixture

8113-27 Neutralizer